[PATCH v2 1/8] mtd: spi-nor: core: Introduce number of dice and volatile register offset params
Dhruva Gole
d-gole at ti.com
Thu Feb 23 01:28:45 PST 2023
On 08/02/23 11:23, tkuw584924 at gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
>
> In use of mult-chip devices, we need to access registers in each die for
s/mult-/multi-
> configuration and status check. The number of dice in the device and
> volatile register offset for each die are essential to iterate register
s/offset/offsets for each die
> access ops.
>
> The number of dice must be initialized as 1 and may be updated through
> SFDP parse.
>
> The volatile register offset table is dinamically allocated based on
s/dinamically/dynamically
> the number of dice then filled with offset values collected from SFDP.
>
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
> ---
> drivers/mtd/spi-nor/core.c | 1 +
> drivers/mtd/spi-nor/core.h | 4 ++++
> 2 files changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index b500655f7937..f18be6283740 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2576,6 +2576,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
> params->writesize = 1;
> params->size = (u64)info->sector_size * info->n_sectors;
> params->page_size = info->page_size;
> + params->num_of_dice = 1;
>
> if (!(info->flags & SPI_NOR_NO_FR)) {
> /* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index f6d012e1f681..c876ece62f13 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -349,6 +349,8 @@ struct spi_nor_otp {
> * in octal DTR mode.
> * @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register
> * command in octal DTR mode.
> + * @num_of_dice: number of dice in the flash memory.
> + * @vreg_offset: volatile register offset for each die.
> * @hwcaps: describes the read and page program hardware
> * capabilities.
> * @reads: read capabilities ordered by priority: the higher index
> @@ -381,6 +383,8 @@ struct spi_nor_flash_parameter {
> u8 addr_mode_nbytes;
> u8 rdsr_dummy;
> u8 rdsr_addr_nbytes;
> + u8 num_of_dice;
> + u32 *vreg_offset;
>
> struct spi_nor_hwcaps hwcaps;
> struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
--
Thanks and Regards,
Dhruva Gole
More information about the linux-mtd
mailing list