[PATCH v4] mtd: parsers: ofpart: add workaround for #size-cells 0
Greg Kroah-Hartman
gregkh at linuxfoundation.org
Sat Feb 4 00:19:19 PST 2023
On Fri, Feb 03, 2023 at 07:37:03PM +0100, Francesco Dolcini wrote:
>
>
> Il 3 febbraio 2023 19:16:23 CET, Miquel Raynal <miquel.raynal at bootlin.com> ha scritto:
> >Hi Francesco,
> >
> >francesco at dolcini.it wrote on Fri, 03 Feb 2023 19:03:27 +0100:
> >
> >> Il 3 febbraio 2023 16:12:02 CET, Miquel Raynal <miquel.raynal at bootlin.com> ha scritto:
> >> >Hi Francesco,
> >> >
> >> >francesco at dolcini.it wrote on Thu, 2 Feb 2023 12:33:34 +0100:
> >> >
> >> >> On Thu, Jan 26, 2023 at 10:12:04AM +0100, Miquel Raynal wrote:
> >> >> > gregkh at linuxfoundation.org wrote on Thu, 26 Jan 2023 10:01:02 +0100:
> >> >> >
> >> >> > > On Wed, Jan 25, 2023 at 10:06:57PM +0100, Francesco Dolcini wrote:
> >> >> > > > Hello Miquel, Greg and all
> >> >> > > >
> >> >> > > > On Tue, Jan 24, 2023 at 04:38:59PM +0100, Greg Kroah-Hartman wrote:
> >> >> > > > > On Tue, Jan 24, 2023 at 11:44:44AM +0100, Francesco Dolcini wrote:
> >> >> > > > > > From: Francesco Dolcini <francesco.dolcini at toradex.com>
> >> >> > > > > >
> >> >> > > > > > Add a mechanism to handle the case in which partitions are present as
> >> >> > > > > > direct child of the nand controller node and #size-cells is set to <0>.
> >> >> > > > > >
> >> >> > > > > > This could happen if the nand-controller node in the DTS is supposed to
> >> >> > > > > > have #size-cells set to 0, but for some historical reason/bug it was set
> >> >> > > > > > to 1 in the past, and the firmware (e.g. U-Boot) is adding the partition
> >> >> > > > > > as direct children of the nand-controller defaulting to #size-cells
> >> >> > > > > > being to 1.
> >> >> > > > > >
> >> >> > > > > > This prevents a real boot failure on colibri-imx7 that happened during v6.1
> >> >> > > > > > development cycles.
> >> >> > > > > >
> >> >> > > > > > Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/
> >> >> > > > > > Link: https://lore.kernel.org/all/20221202071900.1143950-1-francesco@dolcini.it/
> >> >> > > > > > Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
> >> >> > > > > > Reviewed-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> >> >> > > > > > ---
> >> >> > > > > > I do not expect this patch to be backported to stable, however I would expect
> >> >> > > > > > that we do not backport nand-controller dts cleanups neither.
> >> >> > > > > >
> >> >> > > > > > v4:
> >> >> > > > > > fixed wrong English spelling in the comment
> >> >> > > > > >
> >> >> > > > > > v3:
> >> >> > > > > > minor formatting change, removed not needed new-line and space.
> >> >> > > > > >
> >> >> > > > > > v2:
> >> >> > > > > > fixup size-cells only when partitions are direct children of the nand-controller
> >> >> > > > > > completely revised commit message, comments and warning print
> >> >> > > > > > use pr_warn instead of pr_warn_once
> >> >> > > > > > added Reviewed-by Greg
> >> >> > > > > > removed cc:stable@ and fixes tag, since the problematic commit was reverted
> >> >> > > > > > ---
> >> >> > > > > > drivers/mtd/parsers/ofpart_core.c | 19 +++++++++++++++++++
> >> >> > > > > > 1 file changed, 19 insertions(+)
> >> >> > > > > >
> >> >> > > > > > diff --git a/drivers/mtd/parsers/ofpart_core.c b/drivers/mtd/parsers/ofpart_core.c
> >> >> > > > > > index 192190c42fc8..e7b8e9d0a910 100644
> >> >> > > > > > --- a/drivers/mtd/parsers/ofpart_core.c
> >> >> > > > > > +++ b/drivers/mtd/parsers/ofpart_core.c
> >> >> > > > > > @@ -122,6 +122,25 @@ static int parse_fixed_partitions(struct mtd_info *master,
> >> >> > > > > >
> >> >> > > > > > a_cells = of_n_addr_cells(pp);
> >> >> > > > > > s_cells = of_n_size_cells(pp);
> >> >> > > > > > + if (!dedicated && s_cells == 0) {
> >> >> > > > > > + /*
> >> >> > > > > > + * This is a ugly workaround to not create
> >> >> > > > > > + * regression on devices that are still creating
> >> >> > > > > > + * partitions as direct children of the nand controller.
> >> >> > > > > > + * This can happen in case the nand controller node has
> >> >> > > > > > + * #size-cells equal to 0 and the firmware (e.g.
> >> >> > > > > > + * U-Boot) just add the partitions there assuming
> >> >> > > > > > + * 32-bit addressing.
> >> >> > > > > > + *
> >> >> > > > > > + * If you get this warning your firmware and/or DTS
> >> >> > > > > > + * should be really fixed.
> >> >> > > > > > + *
> >> >> > > > > > + * This is working only for devices smaller than 4GiB.
> >> >> > > > > > + */
> >> >> > > > > > + pr_warn("%s: ofpart partition %pOF (%pOF) #size-cells is wrongly set to <0>, assuming <1> for parsing partitions.\n",
> >> >> > > > > > + master->name, pp, mtd_node);
> >> >> > > > >
> >> >> > > > > This is a driver, always use dev_*() calls, not pr_*() calls so that we
> >> >> > > > > know what is being referred to exactly.
> >> >> > > >
> >> >> > > > Is this reasonable here? Where can I get the struct device?
> >> >> > >
> >> >> > > Walk back up the call chain, there has to be a device somewhere
> >> >> > > controlling this, right?
> >> >> > >
> >> >> > > > In general this file uses only pr_* debug API and messages are about OF
> >> >> > > > nodes/properties, not about a device.
> >> >> > >
> >> >> > > OF nodes and properties are part of a device's properties :)
> >> >> >
> >> >> > Yes but the warning comes from a wrong DT description, hence it felt
> >> >> > better suited to warn against the node name which is easily identifiable
> >> >> > in a text file and must be fixed rather than the device which is a pure
> >> >> > software component.
> >> >> >
> >> >> > Anyway, Francesco, please show us the resultant line and if it feels
> >> >> > meaningful enough we'll take the dev_warn approach.
> >> >>
> >> >> So, I tried, but I guess I failed.
> >> >>
> >> >> Both
> >> >>
> >> >> dev_warn(&mtd_get_master(master)->dev, ...);
> >> >>
> >> >> and
> >> >>
> >> >> dev_warn(&master->dev, ...);
> >> >>
> >> >> are NULL.
> >> >
> >> >mtd->dev (in raw NAND) is populated by the controller drivers, so the
> >> >master mtd device is pointing to the bus "struct device" in its
> >> >dev.parent field. This happens at the end of the probe of the
> >> >controller, after setting the dev entry, so we expect the name of the
> >> >controller to appear.
> >> >
> >> >> (null): gpmi-nand: ofpart partition /soc/nand-controller at 33002000/partition at 0 (/soc/nand-controller at 33002000) #size-cells is wrongly set to <0>, assuming <1> for parsing partitions.
> >> >
> >> >Second field looks right, first field does not (bus or class id?) I
> >> >have no idea why it has not been populated at this point (end of the
> >> >controller probe). But it's not a big deal, at least we have the device
> >> >name, so it's ok for me.
> >>
> >> If I understand correctly you are fine with the current patch v4 that just print (on colibri-imx7)
> >
> >Well, yes I was fine with it, but no that's not what I meant.
> >
> >AFAIS, using dev_warn() starts with "(null): gpmi-nand:" while pr_warn
> >started with "gpmi-nand:", so for me the main and relevant information
> >is present, that's all what I care about.
> >
> >Greg cared about the API used so I believe he would prefer us to use
> >dev_warn().
> >
> >It is unusual to apply a patch on which someone active in the community
> >answered negatively as long as his concerns can be addressed, so I
> >would like Greg to either state that he is fine with the pr_warn or you
> >to send a v5 using dev_warn() and him to send his R-by back.
>
> Perfect, I understand and agree.
>
> I was somehow puzzled because changing to dev_warn() on this specific warning message while the whole file already uses pr_warn() just to get a "(null):" prefix in the logs seems a little pointless to me.
Yeah, if the whole rest of the file is this way, a pr_warn() is fine for
now to solve the real problem. You can resolve the use of dev_warn()
later in a follow-on patch once the (null) issues get resolved (as
that's obviously not ok...)
thanks,
greg k-h
More information about the linux-mtd
mailing list