[PATCH v2 1/1] mtd: spi-nor: sfdp: Get the 1-1-8 protocol from BFPT

[Tudor Ambarus]

Hi, Jaime,

Please update the commit subject to indicate that you parse 4BAIT as well.

On 14.12.2023 09:33, Jaime Liao wrote:
> From: JaimeLiao <jaimeliao at mxic.com.tw>
> 
> BFPT 17th DWORD contains the informations about 1-1-8,

Please run checkpatch on further submissions:
./scripts/checkpatch.pl --strict 000*
WARNING: 'informations' may be misspelled - perhaps 'information'?
#6:
BFPT 17th DWORD contains the informations about 1-1-8,
                             ^^^^^^^^^^^^

total: 0 errors, 1 warnings, 0 checks, 46 lines checked


> Parse BFPT 17 DWORD instruction to determine
> whether flash support 1-1-8, and set its dummy cycle
> accordingly.
> 
> Signed-off-by: JaimeLiao <jaimeliao at mxic.com.tw>
> ---
>  drivers/mtd/spi-nor/sfdp.c | 13 ++++++++++++-
>  drivers/mtd/spi-nor/sfdp.h |  3 +++
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index b3b11dfed789..c55f39978762 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -446,6 +446,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  	u32 dword;
>  	u16 half;
>  	u8 erase_mask;
> +	u8 dummy, opcode;
>  
>  	/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
>  	if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
> @@ -525,7 +526,6 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  	for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
>  		const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
>  		u32 erasesize;
> -		u8 opcode;
>  
>  		half = bfpt.dwords[er->dword] >> er->shift;
>  		erasesize = half & 0xff;
> @@ -631,6 +631,16 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>  	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
>  		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
>  
> +	/* Parse 1-1-8 read instruction */
> +	opcode = FIELD_GET(BFPT_DWORD17_RD_1_1_8_CMD, bfpt.dwords[SFDP_DWORD(17)]);
> +	if (opcode) {
> +		dummy = FIELD_GET(BFPT_DWORD17_RD_1_1_8_DUMMY, bfpt.dwords[SFDP_DWORD(17)]);
> +		nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
> +		spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_1_1_8],
> +					  0, dummy, opcode,
> +					  SNOR_PROTO_1_1_8);
> +	}

You missed the mode clocks. You missed to parse 1-8-8. Please check how
the read settings are parsed and set in parse_bfpt() and do the same
here. See:
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git/tree/drivers/mtd/spi-nor/sfdp.c?h=spi-nor/next#n502

> +
>  	/* 8D-8D-8D command extension. */
>  	switch (bfpt.dwords[SFDP_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
>  	case BFPT_DWORD18_CMD_EXT_REP:
> @@ -968,6 +978,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
>  		{ SNOR_HWCAPS_READ_1_1_1_DTR,	BIT(13) },
>  		{ SNOR_HWCAPS_READ_1_2_2_DTR,	BIT(14) },
>  		{ SNOR_HWCAPS_READ_1_4_4_DTR,	BIT(15) },
> +		{ SNOR_HWCAPS_READ_1_1_8,	BIT(20) },

let's set 1-8-8 as well please

>  	};
>  	static const struct sfdp_4bait programs[] = {
>  		{ SNOR_HWCAPS_PP,		BIT(6) },
> diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
> index 6eb99e1cdd61..584a05f9931d 100644
> --- a/drivers/mtd/spi-nor/sfdp.h
> +++ b/drivers/mtd/spi-nor/sfdp.h
> @@ -118,6 +118,9 @@ struct sfdp_bfpt {
>  	(BFPT_DWORD16_EN4B_EN4B | BFPT_DWORD16_EX4B_EX4B)
>  #define BFPT_DWORD16_SWRST_EN_RST		BIT(12)
>  
> +#define BFPT_DWORD17_RD_1_1_8_CMD		GENMASK(31, 24)
> +#define BFPT_DWORD17_RD_1_1_8_DUMMY		GENMASK(20, 16)
> +
>  #define BFPT_DWORD18_CMD_EXT_MASK		GENMASK(30, 29)
>  #define BFPT_DWORD18_CMD_EXT_REP		(0x0UL << 29) /* Repeat */
>  #define BFPT_DWORD18_CMD_EXT_INV		(0x1UL << 29) /* Invert */