[PATCH v2 08/41] mtd: spi-nor: default .n_banks to 1

[Tudor Ambarus]

On 8/22/23 08:09, Michael Walle wrote:
> If .n_banks is not set in the flash_info database, the default value
> should be 1. This way, we don't have to always set the .n_banks
> parameter in flash_info.
> 
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> Reviewed-by: Miquel Raynal <miquel.raynal at bootlin.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus at linaro.org>

> ---
>  drivers/mtd/spi-nor/core.c   | 3 +--
>  drivers/mtd/spi-nor/core.h   | 8 ++++----
>  drivers/mtd/spi-nor/xilinx.c | 1 -
>  3 files changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index e27f1323fa0b..68baf6032639 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2017,7 +2017,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
>  
>  static const struct flash_info spi_nor_generic_flash = {
>  	.name = "spi-nor-generic",
> -	.n_banks = 1,
>  	.parse_sfdp = true,
>  };
>  
> @@ -2997,7 +2996,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->size = info->size;
>  	params->bank_size = params->size;
>  	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
> -	params->n_banks = info->n_banks;
> +	params->n_banks = info->n_banks ?: SPI_NOR_DEFAULT_N_BANKS;
>  
>  	if (!(info->flags & SPI_NOR_NO_FR)) {
>  		/* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 2fc999f2787c..8627d0b95be6 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -15,6 +15,7 @@
>   * have the page size defined within their SFDP tables.
>   */
>  #define SPI_NOR_DEFAULT_PAGE_SIZE 256
> +#define SPI_NOR_DEFAULT_N_BANKS 1
>  
>  /* Standard SPI NOR flash operations. */
>  #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
> @@ -453,7 +454,7 @@ struct spi_nor_fixups {
>   * @size:           the size of the flash in bytes.
>   * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
>   *                  isn't necessarily called a "sector" by the vendor.
> - * @n_banks:        the number of banks.
> + * @n_banks:        (optional) the number of banks. Defaults to 1.
>   * @page_size:      (optional) the flash's page size. Defaults to 256.
>   * @addr_nbytes:    number of address bytes to send.
>   *
> @@ -570,7 +571,7 @@ struct flash_info {
>  /* Used when the "_ext_id" is two bytes at most */
>  #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
>  	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
> -	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
> +	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
>  
>  #define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
>  	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
> @@ -578,13 +579,12 @@ struct flash_info {
>  
>  #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
>  	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
> -	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
> +	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
>  
>  #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
>  		.size = (_sector_size) * (_n_sectors),			\
>  		.sector_size = (_sector_size),				\
>  		.page_size = (_page_size),				\
> -		.n_banks = 1,						\
>  		.addr_nbytes = (_addr_nbytes),				\
>  		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
>  
> diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
> index 284e2e4970ab..8d4539e32dfe 100644
> --- a/drivers/mtd/spi-nor/xilinx.c
> +++ b/drivers/mtd/spi-nor/xilinx.c
> @@ -26,7 +26,6 @@
>  		.size = 8 * (_page_size) * (_n_sectors),		\
>  		.sector_size = (8 * (_page_size)),			\
>  		.page_size = (_page_size),				\
> -		.n_banks = 1,						\
>  		.flags = SPI_NOR_NO_FR
>  
>  /* Xilinx S3AN share MFR with Atmel SPI NOR */
>