[PATCH v3 1/3] mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
tkuw584924 at gmail.com
tkuw584924 at gmail.com
Wed Apr 5 23:17:44 PDT 2023
From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.
In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus at linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
Cc: stable at vger.kernel.org
---
drivers/mtd/spi-nor/core.c | 3 +++
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/debugfs.c | 1 +
drivers/mtd/spi-nor/spansion.c | 13 ++++++++++++-
4 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1e30737b607b..143ca3c9b477 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3407,6 +3407,9 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
mtd->name = dev_name(dev);
mtd->type = MTD_NORFLASH;
mtd->flags = MTD_CAP_NORFLASH;
+ /* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
+ if (nor->flags & SNOR_F_ECC)
+ mtd->flags &= ~MTD_BIT_WRITEABLE;
if (nor->info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
else
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index ea9033cb0a01..8cfa82ed06c7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -131,6 +131,7 @@ enum spi_nor_option_flags {
SNOR_F_SOFT_RESET = BIT(12),
SNOR_F_SWP_IS_VOLATILE = BIT(13),
SNOR_F_RWW = BIT(14),
+ SNOR_F_ECC = BIT(15),
};
struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index e200f5b9234c..082c0c5a8626 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -26,6 +26,7 @@ static const char *const snor_f_names[] = {
SNOR_F_NAME(SOFT_RESET),
SNOR_F_NAME(SWP_IS_VOLATILE),
SNOR_F_NAME(RWW),
+ SNOR_F_NAME(ECC),
};
#undef SNOR_F_NAME
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 352c40dd3864..19b1436f36ea 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -332,6 +332,17 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
return 0;
}
+static void cypress_nor_ecc_init(struct spi_nor *nor)
+{
+ /*
+ * Programming is supported only in 16-byte ECC data unit granularity.
+ * Byte-programming, bit-walking, or multiple program operations to the
+ * same ECC data unit without an erase are not allowed.
+ */
+ nor->params->writesize = 16;
+ nor->flags |= SNOR_F_ECC;
+}
+
static int
s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
@@ -506,7 +517,7 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
static void s28hx_t_late_init(struct spi_nor *nor)
{
nor->params->octal_dtr_enable = cypress_nor_octal_dtr_enable;
- nor->params->writesize = 16;
+ cypress_nor_ecc_init(nor);
}
static const struct spi_nor_fixups s28hx_t_fixups = {
--
2.34.1
More information about the linux-mtd
mailing list