[PATCH v2] mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon SEMPER flash

[tkuw584924 at gmail.com]

From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. To activate it, MTD_BIT_WRITEABLE needs to be
unset in mtd->flags.

A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.

In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.

Fixes: 6afcc84080c4 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Fixes: b6b23833fc42 ("mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups")
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus at linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
Cc: stable at vger.kernel.org
---
 drivers/mtd/spi-nor/core.c     |  3 +++
 drivers/mtd/spi-nor/core.h     |  1 +
 drivers/mtd/spi-nor/debugfs.c  |  1 +
 drivers/mtd/spi-nor/spansion.c | 28 +++++++++++++++-------------
 4 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c67369815fde..46592e04d5ef 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3406,6 +3406,9 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
 		mtd->name = dev_name(dev);
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
+	/* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
+	if (nor->flags & SNOR_F_ECC)
+		mtd->flags &= ~MTD_BIT_WRITEABLE;
 	if (nor->info->flags & SPI_NOR_NO_ERASE)
 		mtd->flags |= MTD_NO_ERASE;
 	else
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index ea9033cb0a01..8cfa82ed06c7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -131,6 +131,7 @@ enum spi_nor_option_flags {
 	SNOR_F_SOFT_RESET	= BIT(12),
 	SNOR_F_SWP_IS_VOLATILE	= BIT(13),
 	SNOR_F_RWW		= BIT(14),
+	SNOR_F_ECC		= BIT(15),
 };
 
 struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index e200f5b9234c..082c0c5a8626 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -26,6 +26,7 @@ static const char *const snor_f_names[] = {
 	SNOR_F_NAME(SOFT_RESET),
 	SNOR_F_NAME(SWP_IS_VOLATILE),
 	SNOR_F_NAME(RWW),
+	SNOR_F_NAME(ECC),
 };
 #undef SNOR_F_NAME
 
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 352c40dd3864..ffeede78700d 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -332,6 +332,17 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
 	return 0;
 }
 
+static void cypress_nor_ecc_init(struct spi_nor *nor)
+{
+	/*
+	 * Programming is supported only in 16-byte ECC data unit granularity.
+	 * Byte-programming, bit-walking, or multiple program operations to the
+	 * same ECC data unit without an erase are not allowed.
+	 */
+	nor->params->writesize = 16;
+	nor->flags |= SNOR_F_ECC;
+}
+
 static int
 s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
 			  const struct sfdp_parameter_header *bfpt_header,
@@ -373,13 +384,7 @@ static void s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
 
 static void s25fs256t_late_init(struct spi_nor *nor)
 {
-	/*
-	 * Programming is supported only in 16-byte ECC data unit granularity.
-	 * Byte-programming, bit-walking, or multiple program operations to the
-	 * same ECC data unit without an erase are not allowed. See chapter
-	 * 5.3.1 and 5.6 in the datasheet.
-	 */
-	nor->params->writesize = 16;
+	cypress_nor_ecc_init(nor);
 }
 
 static struct spi_nor_fixups s25fs256t_fixups = {
@@ -431,13 +436,10 @@ static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
 
 static void s25hx_t_late_init(struct spi_nor *nor)
 {
-	struct spi_nor_flash_parameter *params = nor->params;
-
 	/* Fast Read 4B requires mode cycles */
-	params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+	nor->params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
 
-	/* The writesize should be ECC data unit size */
-	params->writesize = 16;
+	cypress_nor_ecc_init(nor);
 }
 
 static struct spi_nor_fixups s25hx_t_fixups = {
@@ -506,7 +508,7 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
 static void s28hx_t_late_init(struct spi_nor *nor)
 {
 	nor->params->octal_dtr_enable = cypress_nor_octal_dtr_enable;
-	nor->params->writesize = 16;
+	cypress_nor_ecc_init(nor);
 }
 
 static const struct spi_nor_fixups s28hx_t_fixups = {
-- 
2.34.1