[PATCH 2/2] mtd: rawnand: lpc32xx_slc: switch to using gpiod API

[Dmitry Torokhov]

This switches the driver from legacy gpio API to a newer gpiod API.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
 drivers/mtd/nand/raw/lpc32xx_slc.c | 33 +++++++++++++++---------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index 6b7269cfb7d8..4702577f74e5 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -23,9 +23,8 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/mtd/lpc32xx_slc.h>
 
 #define LPC32XX_MODNAME		"lpc32xx-nand"
@@ -208,7 +207,6 @@ struct lpc32xx_nand_cfg_slc {
 	uint32_t rwidth;
 	uint32_t rhold;
 	uint32_t rsetup;
-	int wp_gpio;
 	struct mtd_partition *parts;
 	unsigned num_parts;
 };
@@ -217,6 +215,7 @@ struct lpc32xx_nand_host {
 	struct nand_chip	nand_chip;
 	struct lpc32xx_slc_platform_data *pdata;
 	struct clk		*clk;
+	struct gpio_desc	*wp_gpio;
 	void __iomem		*io_base;
 	struct lpc32xx_nand_cfg_slc *ncfg;
 
@@ -309,8 +308,8 @@ static int lpc32xx_nand_device_ready(struct nand_chip *chip)
  */
 static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
 {
-	if (gpio_is_valid(host->ncfg->wp_gpio))
-		gpio_set_value(host->ncfg->wp_gpio, 0);
+	if (host->wp_gpio)
+		gpiod_set_value_cansleep(host->wp_gpio, 1);
 }
 
 /*
@@ -318,8 +317,8 @@ static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
  */
 static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
 {
-	if (gpio_is_valid(host->ncfg->wp_gpio))
-		gpio_set_value(host->ncfg->wp_gpio, 1);
+	if (host->wp_gpio)
+		gpiod_set_value_cansleep(host->wp_gpio, 0);
 }
 
 /*
@@ -764,8 +763,6 @@ static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
 		return NULL;
 	}
 
-	ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
-
 	return ncfg;
 }
 
@@ -852,14 +849,18 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 			"Missing or bad NAND config from device tree\n");
 		return -ENOENT;
 	}
-	if (host->ncfg->wp_gpio == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-	if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
-			host->ncfg->wp_gpio, "NAND WP")) {
-		dev_err(&pdev->dev, "GPIO not available\n");
-		return -EBUSY;
+
+	/* Start with WP disabled, if available */
+	host->wp_gpio = gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW);
+	res = PTR_ERR_OR_ZERO(host->wp_gpio);
+	if (res) {
+		if (res != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "WP GPIO is not available: %d\n",
+				res);
+		return res;
 	}
-	lpc32xx_wp_disable(host);
+
+	gpiod_set_consumer_name(host->wp_gpio, "NAND WP");
 
 	host->pdata = dev_get_platdata(&pdev->dev);
 
-- 
2.38.0.rc1.362.ged0d419d3c-goog