[PATCH v3 1/2] mtd: spi-nor: issi: is25wp256: Init flash based on SFDP

[Michael Walle]

Am 2022-09-20 20:48, schrieb Sudip Mukherjee:
> The datasheet of is25wp256 says it supports SFDP. Get rid of the static
> initialization of the flash parameters and init them when parsing SFDP.
> 
> Testing showed the flash using SPINOR_OP_READ_1_1_4_4B 0x6c,
> SPINOR_OP_PP_4B 0x12 and SPINOR_OP_BE_4K_4B 0x21 before enabling SFDP.
> After this patch, it parses the SFDP information and still uses the
> same opcodes.
> 
> Signed-off-by: Sudip Mukherjee <sudip.mukherjee at sifive.com>
> ---
> 
> No change from v2, just resending again with the next patch.
> Results from the tests given by Tudor in the following mail.
> 
> 
>  drivers/mtd/spi-nor/issi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> index 89a66a19d754f..8b48459b5054c 100644
> --- a/drivers/mtd/spi-nor/issi.c
> +++ b/drivers/mtd/spi-nor/issi.c
> @@ -71,7 +71,7 @@ static const struct flash_info issi_nor_parts[] = {
>  	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
>  		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512)

I'm curious, does it also work with:
   	{ "is25wp256", INFO(0x9d7019, 0, 0, 0)
		PARSE_SFDP
-michael

> -		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
> +		PARSE_SFDP
>  		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
>  		.fixups = &is25lp256_fixups },