[PATCH v3 1/2] mtd: spi-nor: issi: is25wp256: Init flash based on SFDP

[Sudip Mukherjee]

The datasheet of is25wp256 says it supports SFDP. Get rid of the static
initialization of the flash parameters and init them when parsing SFDP.

Testing showed the flash using SPINOR_OP_READ_1_1_4_4B 0x6c,
SPINOR_OP_PP_4B 0x12 and SPINOR_OP_BE_4K_4B 0x21 before enabling SFDP.
After this patch, it parses the SFDP information and still uses the
same opcodes.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee at sifive.com>
---

No change from v2, just resending again with the next patch.
Results from the tests given by Tudor in the following mail.


 drivers/mtd/spi-nor/issi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 89a66a19d754f..8b48459b5054c 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -71,7 +71,7 @@ static const struct flash_info issi_nor_parts[] = {
 	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		PARSE_SFDP
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
 
-- 
2.30.2