[PATCH v1 01/11] PCI: tegra: switch to using devm_fwnode_gpiod_get

[Andy Shevchenko]

On Mon, Sep 5, 2022 at 10:23 AM Pali Rohár <pali at kernel.org> wrote:
> On Sunday 04 September 2022 23:30:53 Dmitry Torokhov wrote:

...

> > -             rp->reset_gpio = devm_gpiod_get_from_of_node(dev, port,
> > -                                                          "reset-gpios", 0,
> > -                                                          GPIOD_OUT_LOW,
> > -                                                          label);
> > +             rp->reset_gpio = devm_fwnode_gpiod_get(dev,
> > +                                                    of_fwnode_handle(port),
> > +                                                    "reset",
> > +                                                    GPIOD_OUT_LOW,
> > +                                                    label);
>
> Why in pci-aardvark.c for PERST# reset-gpio you have used
> devm_gpiod_get_optional() and here in pci-tegra.c you have used
> devm_fwnode_gpiod_get()? I think that PERST# logic is same in both
> drivers.

It's not the same dev and its node in this case. There is one reset
for _all_ ports, here is the reset on _per port_ basis.

-- 
With Best Regards,
Andy Shevchenko