[PATCH v1 06/11] PCI: aardvark: switch to using devm_gpiod_get_optional()

Dmitry Torokhov dmitry.torokhov at gmail.com
Sun Sep 4 23:30:58 PDT 2022


I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
device property API.

I believe that the only reason the driver, instead of the standard
devm_gpiod_get_optional(), used devm_gpiod_get_from_of_node() is
because it wanted to set up a pretty consumer name for the GPIO,
and we now have a special API for that.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 4834198cc86b..4a8a4a8522cb 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1856,20 +1856,19 @@ static int advk_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
-						       "reset-gpios", 0,
-						       GPIOD_OUT_LOW,
-						       "pcie1-reset");
+	pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
 	if (ret) {
-		if (ret == -ENOENT) {
-			pcie->reset_gpio = NULL;
-		} else {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Failed to get reset-gpio: %i\n",
-					ret);
-			return ret;
-		}
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get reset-gpio: %i\n",
+				ret);
+		return ret;
+	}
+
+	ret = gpiod_set_consumer_name(pcie->reset_gpio, "pcie1-reset");
+	if (ret) {
+		dev_err(dev, "Failed to set reset gpio name: %d\n", ret);
+		return ret;
 	}
 
 	ret = of_pci_get_max_link_speed(dev->of_node);

-- 
b4 0.10.0-dev-fc921



More information about the linux-mtd mailing list