[PATCH v1 10/11] watchdog: bd9576_wdt: switch to using devm_fwnode_gpiod_get()
Dmitry Torokhov
dmitry.torokhov at gmail.com
Sun Sep 4 23:31:02 PDT 2022
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
While at it switch the rest of the calls to read properties in
bd9576_wdt_probe() to the generic device property API as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
diff --git a/drivers/watchdog/bd9576_wdt.c b/drivers/watchdog/bd9576_wdt.c
index 0b6999f3b6e8..4a20e07fbb69 100644
--- a/drivers/watchdog/bd9576_wdt.c
+++ b/drivers/watchdog/bd9576_wdt.c
@@ -9,8 +9,8 @@
#include <linux/gpio/consumer.h>
#include <linux/mfd/rohm-bd957x.h>
#include <linux/module.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/watchdog.h>
@@ -202,10 +202,10 @@ static int bd957x_set_wdt_mode(struct bd9576_wdt_priv *priv, int hw_margin,
static int bd9576_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->parent->of_node;
struct bd9576_wdt_priv *priv;
u32 hw_margin[2];
u32 hw_margin_max = BD957X_WDT_DEFAULT_MARGIN, hw_margin_min = 0;
+ int count;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -221,40 +221,51 @@ static int bd9576_wdt_probe(struct platform_device *pdev)
return -ENODEV;
}
- priv->gpiod_en = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
- "rohm,watchdog-enable-gpios",
- 0, GPIOD_OUT_LOW,
- "watchdog-enable");
+ priv->gpiod_en = devm_fwnode_gpiod_get(dev, dev_fwnode(dev->parent),
+ "rohm,watchdog-enable",
+ GPIOD_OUT_LOW,
+ "watchdog-enable");
if (IS_ERR(priv->gpiod_en))
return dev_err_probe(dev, PTR_ERR(priv->gpiod_en),
"getting watchdog-enable GPIO failed\n");
- priv->gpiod_ping = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
- "rohm,watchdog-ping-gpios",
- 0, GPIOD_OUT_LOW,
- "watchdog-ping");
+ priv->gpiod_ping = devm_fwnode_gpiod_get(dev, dev_fwnode(dev->parent),
+ "rohm,watchdog-ping",
+ GPIOD_OUT_LOW,
+ "watchdog-ping");
if (IS_ERR(priv->gpiod_ping))
return dev_err_probe(dev, PTR_ERR(priv->gpiod_ping),
"getting watchdog-ping GPIO failed\n");
- ret = of_property_read_variable_u32_array(np, "rohm,hw-timeout-ms",
- &hw_margin[0], 1, 2);
- if (ret < 0 && ret != -EINVAL)
- return ret;
+ count = device_property_count_u32(dev->parent, "rohm,hw-timeout-ms");
+ if (count < 0 && count != -EINVAL)
+ return count;
+
+ if (count > 0) {
+ if (count > ARRAY_SIZE(hw_margin))
+ return -EINVAL;
- if (ret == 1)
- hw_margin_max = hw_margin[0];
+ ret = device_property_read_u32_array(dev->parent,
+ "rohm,hw-timeout-ms",
+ hw_margin, count);
+ if (ret < 0)
+ return ret;
- if (ret == 2) {
- hw_margin_max = hw_margin[1];
- hw_margin_min = hw_margin[0];
+ if (count == 1)
+ hw_margin_max = hw_margin[0];
+
+ if (count == 2) {
+ hw_margin_max = hw_margin[1];
+ hw_margin_min = hw_margin[0];
+ }
}
ret = bd957x_set_wdt_mode(priv, hw_margin_max, hw_margin_min);
if (ret)
return ret;
- priv->always_running = of_property_read_bool(np, "always-running");
+ priv->always_running = device_property_read_bool(dev->parent,
+ "always-running");
watchdog_set_drvdata(&priv->wdd, priv);
--
b4 0.10.0-dev-fc921
More information about the linux-mtd
mailing list