[PATCH] ubi: block: Reduce warning print to info for static volumes

[Mårten Lindahl]

If volume size is not multiple of the sector size 512 a warning is
printed saying that the last non-sector aligned bytes will be ignored.

This should be valid for resizable volumes, but when creating static
volumes which are read only this will always be printed even if the
unaligned data is deliberate.

The message is still valid but the severity should be lowered for static
volumes.

Signed-off-by: Mårten Lindahl <marten.lindahl at axis.com>
---
 drivers/mtd/ubi/block.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c
index 4cf67a2a0d04..dfcb947fbfc6 100644
--- a/drivers/mtd/ubi/block.c
+++ b/drivers/mtd/ubi/block.c
@@ -354,9 +354,12 @@ static int calc_disk_capacity(struct ubi_volume_info *vi, u64 *disk_capacity)
 	u64 size = vi->used_bytes >> 9;
 
 	if (vi->used_bytes % 512) {
-		pr_warn("UBI: block: volume size is not a multiple of 512, "
-			"last %llu bytes are ignored!\n",
-			vi->used_bytes - (size << 9));
+		if (vi->vol_type == UBI_DYNAMIC_VOLUME)
+			pr_warn("UBI: block: volume size is not a multiple of 512, last %llu bytes are ignored!\n",
+				vi->used_bytes - (size << 9));
+		else
+			pr_info("UBI: block: volume size is not a multiple of 512, last %llu bytes are ignored!\n",
+				vi->used_bytes - (size << 9));
 	}
 
 	if ((sector_t)size != size)
-- 
2.30.2