[PATCH 1/2] mtd: spinand: winbond: fix winbond lashes identifications

[mikhail.kshevetskiy at iopsys.eu]

From: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>

Winbond uses 3 bytes to identify flash: vendor_id, dev_id_0, dev_id_1,
but current driver uses only first 2 bytes of it for devices
idenfification. As result Winbond W25N02KV flash (id_bytes: EF, AA, 22)
is identified as W25N01GV (id_bytes: EF, AA, 21).

Fix this by adding missed identification bytes.

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
 drivers/mtd/nand/spi/winbond.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 76684428354e..ed368a55d68f 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -76,7 +76,7 @@ static int w25m02gv_select_target(struct spinand_device *spinand,
 
 static const struct spinand_info winbond_spinand_table[] = {
 	SPINAND_INFO("W25M02GV",
-		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
@@ -86,7 +86,7 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
 	SPINAND_INFO("W25N01GV",
-		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21),
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
 		     NAND_ECCREQ(1, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-- 
2.35.1