[PATCH] mtd: rawnand: mpc5121: Replace NO_IRQ by 0

[Miquel Raynal]

Hi Christophe,

christophe.leroy at csgroup.eu wrote on Thu,  6 Oct 2022 07:29:12 +0200:

> NO_IRQ is used to check the return of irq_of_parse_and_map().
> 
> On some architecture NO_IRQ is 0, on other architectures it is -1.
> 
> irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.
> 
> So use 0 instead of using NO_IRQ.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>

Deserves Fixes and Cc:stable tags, isn't it?

> ---
>  drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
> index 800d774aed8e..f68349cb7824 100644
> --- a/drivers/mtd/nand/raw/mpc5121_nfc.c
> +++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
> @@ -663,7 +663,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
>  	}
>  
>  	prv->irq = irq_of_parse_and_map(dn, 0);
> -	if (prv->irq == NO_IRQ) {
> +	if (!prv->irq) {
>  		dev_err(dev, "Error mapping IRQ!\n");
>  		return -EINVAL;
>  	}


Thanks,
Miquèl