[GIT PULL] mtd: Changes for 5.19
Miquel Raynal
miquel.raynal at bootlin.com
Mon May 23 02:24:59 PDT 2022
Hello Linus,
This is the MTD PR for 5.19-rc1.
Thanks,
Miquèl
The following changes since commit b2d229d4ddb17db541098b83524d901257e93845:
Linux 5.18-rc3 (2022-04-17 13:57:31 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/mtd/for-5.19
for you to fetch changes up to 2c51d0d88020b4d3c9bbe7d9df2796b2c2ce05b8:
Merge tag 'nand/for-5.19' into mtd/next (2022-05-20 13:59:25 +0200)
----------------------------------------------------------------
MTD core changes:
* Call of_platform_populate() for MTD partitions
* Check devicetree alias for index
* mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
* mtdblock: Warn if opened on NAND
* Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
* st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
* phram:
- Allow cached mappings
- Allow probing via reserved-memory
* maps: ixp4xx: Drop driver
* bcm47xxpart: Print correct offset on read error
CFI driver changes:
* Rename chip_ready variables
* Add S29GL064N ID definition
* Use chip_ready() for write on S29GL064N
* Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
SPI NOR core changes:
* Read back written SR value to make sure the write was done correctly.
* Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
* Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
* Clarify rdsr dummy cycles documentation.
* Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
* Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
* Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
* Rework Micron and Cypress Octal DTR enable methods to improve
readability.
* Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
* Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
----------------------------------------------------------------
Andreas Böhler (1):
mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash
Bjørn Mork (1):
mtdblock: warn if opened on NAND
Chen-Tsung Hsieh (1):
mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()
Chuanhong Guo (7):
mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG
mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
mtd: nand: make mtk_ecc.c a separated module
mtd: nand: mtk-ecc: also parse nand-ecc-engine if available
Felix Matouschek (1):
mtd: spinand: Add support for XTX XT26G0xA
Geert Uytterhoeven (1):
mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
Han Xu (5):
mtd: rawnand: gpmi: Refactor bch geometry settings function
mtd: rawnand: gpmi: Add strict ecc strength check
mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function
mtd: rawnand: gpmi: Rename the variable ecc_chunk_size
mtd: rawnand: gpmi: Add large oob bch setting support
Jean-Marc Eurin (3):
mtd: mtdoops: Fix the size of the header read buffer.
mtd: mtdoops: Create a header structure for the saved mtdoops.
mtd: mtdoops: Add a timestamp to the mtdoops header.
Krzysztof Kozlowski (1):
dt-bindings: mtd: jedec, spi-nor: remove unneeded properties
Leon M. George (1):
mtd: spi-nor: support eon en25qh256a variant
Linus Walleij (1):
mtd: maps: ixp4xx: Drop driver
Michael Walle (5):
mtd: spi-nor: amend the rdsr dummy cycles documentation
mtd: spi-nor: move spi_nor_write_ear() to winbond module
mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()
mtd: spi-nor: expose internal parameters via debugfs
mtd: spi-nor: debugfs: fix format specifier
Mikhail Zhilkin (2):
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
dt-bindings: mtd: partitions: Extend fixed-partitions binding
Minghao Chi (1):
mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
Miquel Raynal (5):
Merge tag 'mtd/mtk-spi-nand-for-5.19' into nand/next
dt-bindings: mtd: renesas: Fix the NAND controller description
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
Merge tag 'spi-nor/for-5.19' into mtd/next
Merge tag 'nand/for-5.19' into mtd/next
Phil Edworthy (2):
mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
Rafał Miłecki (3):
mtd: parsers: bcm47xxpart: print correct offset on read error
mtd: rawnand: print offset instead of page number for bad blocks
mtd: call of_platform_populate() for MTD partitions
Rickard x Andersson (1):
mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
Roger Quadros (3):
dt-bindings: mtd: ti,elm: Convert to yaml
dt-bindings: mtd: ti,elm: Add support for AM64 ELM
mtd: rawnand: omap_elm: Add compatible for AM64 ELM
Shaik Sajida Bhanu (1):
mtd: spi-nor: winbond: add support for W25Q512NW-IM
Tokunori Ikegami (4):
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
mtd: cfi_cmdset_0002: Add S29GL064N ID definition
mtd: cfi_cmdset_0002: Rename chip_ready variables
Tudor Ambarus (11):
mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name
mtd: spi-nor: Introduce spi_nor_match_id()
mtd: spi-nor: core: Use auto-detection only once
mtd: spi-nor: core: Introduce method for RDID op
mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method
mtd: spi-nor: core: Add helpers to read/write any register
mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()
mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()
mtd: spi-nor: Introduce templates for SPI NOR operations
mtd: spi-nor: spansion: Remove status polling on volatile registers write
mtd: spi-nor: micron-st: Remove status polling on volatile registers write
Vincent Whitchurch (4):
mtd: core: Check devicetree alias for index
dt-bindings: reserved-memory: Support MTD/block device
mtd: phram: Allow probing via reserved-memory
mtd: phram: Allow cached mappings
Wang Weiyang (1):
mtd: rawnand: davinci: Remove redundant unsigned comparison to zero
Yang Yingliang (4):
mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()
mtd: rawnand: tmio: check return value after calling platform_get_resource()
mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
Zheyu Ma (1):
mtd: rawnand: denali: Use managed device resources
Documentation/devicetree/bindings/mtd/elm.txt | 16 --
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 8 -
.../devicetree/bindings/mtd/partitions/fixed-partitions.yaml | 55 +++++-
Documentation/devicetree/bindings/mtd/renesas-nandc.yaml | 5 +
Documentation/devicetree/bindings/mtd/ti,elm.yaml | 72 +++++++
Documentation/devicetree/bindings/reserved-memory/phram.yaml | 47 +++++
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/mtd/chips/cfi_cmdset_0002.c | 112 +++++------
drivers/mtd/devices/phram.c | 108 +++++++++-
drivers/mtd/devices/st_spi_fsm.c | 2 +
drivers/mtd/maps/Kconfig | 9 -
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/ixp4xx.c | 262 ------------------------
drivers/mtd/mtdblock.c | 8 +-
drivers/mtd/mtdcore.c | 11 +-
drivers/mtd/mtdoops.c | 61 +++---
drivers/mtd/mtdpart.c | 9 +
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} | 8 +-
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/Makefile | 2 +-
drivers/mtd/nand/raw/cadence-nand-controller.c | 5 +-
drivers/mtd/nand/raw/cs553x_nand.c | 7 +-
drivers/mtd/nand/raw/davinci_nand.c | 2 +-
drivers/mtd/nand/raw/denali_pci.c | 15 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 296 ++++++++++++++++++++++++----
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 12 +-
drivers/mtd/nand/raw/intel-nand-controller.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 3 +-
drivers/mtd/nand/raw/mtk_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 9 +-
drivers/mtd/nand/raw/nand_ids.c | 6 +
drivers/mtd/nand/raw/nand_toshiba.c | 6 +-
drivers/mtd/nand/raw/omap_elm.c | 1 +
drivers/mtd/nand/raw/renesas-nand-controller.c | 51 +++--
drivers/mtd/nand/raw/rockchip-nand-controller.c | 20 +-
drivers/mtd/nand/raw/tmio_nand.c | 3 +
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/gigadevice.c | 158 ++++++++++++++-
drivers/mtd/nand/spi/xtx.c | 129 ++++++++++++
drivers/mtd/parsers/bcm47xxpart.c | 2 +-
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/core.c | 286 +++++++++++++--------------
drivers/mtd/spi-nor/core.h | 123 +++++++++++-
drivers/mtd/spi-nor/debugfs.c | 249 +++++++++++++++++++++++
drivers/mtd/spi-nor/eon.c | 3 +-
drivers/mtd/spi-nor/micron-st.c | 181 ++++++++---------
drivers/mtd/spi-nor/spansion.c | 187 +++++++++---------
drivers/mtd/spi-nor/winbond.c | 45 ++++-
drivers/mtd/spi-nor/xilinx.c | 12 +-
drivers/of/platform.c | 1 +
include/linux/mtd/cfi.h | 1 +
.../mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h | 0
include/linux/mtd/spi-nor.h | 4 +-
include/linux/mtd/spinand.h | 1 +
57 files changed, 1772 insertions(+), 862 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mtd/elm.txt
create mode 100644 Documentation/devicetree/bindings/mtd/ti,elm.yaml
create mode 100644 Documentation/devicetree/bindings/reserved-memory/phram.yaml
delete mode 100644 drivers/mtd/maps/ixp4xx.c
rename drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} (98%)
create mode 100644 drivers/mtd/nand/spi/xtx.c
create mode 100644 drivers/mtd/spi-nor/debugfs.c
rename drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h (100%)
More information about the linux-mtd
mailing list