[PATCH v3 2/2] dt-bindings: mtd: qcom_nandc: document qcom, boot-pages binding

[Ansuel Smith]

Document new qcom,boot-pages binding used to apply special
read/write configuration to boot pages.

QCOM apply a special configuration where spare data is not protected
by ECC for some special pages (used for boot partition). Add
Documentation on how to declare these special pages.

Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
---
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..3b8244db2ae8 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -102,6 +102,30 @@ allOf:
             - const: rx
             - const: cmd
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-nand
+
+    then:
+      properties:
+        qcom,boot-pages:
+          $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          items:
+            items:
+              - description: offset
+              - description: size
+          description:
+            Some special page used by boot partition have spare data
+            not protected by ECC. Use this to declare these special page
+            by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+
+            Refer to the ipq8064 example on how to use this special binding.
+
 required:
   - compatible
   - reg
@@ -135,6 +159,8 @@ examples:
         nand-ecc-strength = <4>;
         nand-bus-width = <8>;
 
+        qcom,boot-pages = <0x0 0x58a0000>;
+
         partitions {
           compatible = "fixed-partitions";
           #address-cells = <1>;
-- 
2.34.1