[PATCH v2 2/2] dt-bindings: mtd: qcom_nandc: document qcom,boot-pages binding

[Ansuel Smith]

On Mon, May 16, 2022 at 01:49:12PM -0500, Rob Herring wrote:
> On Tue, May 03, 2022 at 05:43:53PM +0200, Ansuel Smith wrote:
> > Document new qcom,boot_pages binding used to apply special
> 
> s/boot_pages/boot-pages/
> 
> > read/write configuration to boot pages.
> > 
> > QCOM apply a special configuration where spare data is not protected
> > by ECC for some special pages (used for boot partition). Add
> > Documentation on how to declare these special pages.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
> > ---
> >  .../devicetree/bindings/mtd/qcom,nandc.yaml   | 22 +++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > index 84ad7ff30121..fafeca0cafff 100644
> > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > @@ -102,6 +102,26 @@ allOf:
> >              - const: rx
> >              - const: cmd
> >  
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - qcom,ipq8074-nand
> > +
> > +    then:
> > +      properties:
> > +        qcom,boot-pages:
> > +          $ref: /schemas/types.yaml#/definitions/uint32-matrix
> 
> You need to define the dimensions. Something like this:
> 
>              items:
>                items:
>                  - description: offset
>                  - description: size
>

Considering this is not limited to one item how should I declare that an
user can declare multiple items? (the user can declare multiple zones)
Declaring minItems without a maxItems? 

I assume in the suggested form it's assumed
minItems: 1
maxItems: 1
so this would be problematic.

> > +          description:
> > +            Some special page used by boot partition have spare data
> > +            not protected by ECC. Use this to declare these special page
> > +            by defining first the offset and then the size.
> > +
> > +            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
> > +
> > +            Refer to the ipq8064 example on how to use this special binding.
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -135,6 +155,8 @@ examples:
> >          nand-ecc-strength = <4>;
> >          nand-bus-width = <8>;
> >  
> > +        qcom,boot-pages = <0x0 0x58a0000>;
> > +
> >          partitions {
> >            compatible = "fixed-partitions";
> >            #address-cells = <1>;
> > -- 
> > 2.34.1
> > 
> > 

-- 
	Ansuel