[PATCH v5 0/3] Add support for Sercomm partitions

[Miquel Raynal]

Hi Mikhail,

csharper2005 at gmail.com wrote on Mon, 16 May 2022 15:12:28 +0000:

> This patch series add support for Sercomm mtd partition table parser. It's
> used in some Beeline, Netgear and Sercomm routers. The Sercomm partition
> map table contains real partition offsets, which may differ from device to
> device depending on the number and location of bad blocks on NAND.

Series applied in place of the previous version on mtd/next.

> 
> Changes since:
> v4:
>  - Add Acked-by to the first patch
> 
> v3:
>  - Fix commit message of the first patch
>  - Add Reviewed-by to the second patch
> 
> v2:
>  - Fix mistakes in dt-binding
>  - Add patch for new vendor prefix
>  - Add vendor prefix to scpart-id property
> 
> v1:
>  - Add dt-binding in a separate patch
>  - Remove redundant braces and logical NOT operator
>  - Define pr_fmt
>  - Replace kcalloc by kzalloc
>  - Use of_get_child_count() and alloc big enough array before the
>    for_each_child_of_node()
> 
> Mikhail Zhilkin (3):
>   dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
>   dt-bindings: mtd: partitions: Extend fixed-partitions binding
>   mtd: parsers: add support for Sercomm partitions
> 
>  .../mtd/partitions/fixed-partitions.yaml      |  55 +++-
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  drivers/mtd/parsers/Kconfig                   |   9 +
>  drivers/mtd/parsers/Makefile                  |   1 +
>  drivers/mtd/parsers/scpart.c                  | 240 ++++++++++++++++++
>  5 files changed, 305 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/mtd/parsers/scpart.c
> 


Thanks,
Miquèl