[PATCH 0/2] mtd: spi-nor: introduce SNOR_ID3()

[Michael Walle]

[proper subject]

Am 2022-05-10 16:02, schrieb Michael Walle:
> For support which rely solely on the SFDP data, all we need to know is 
> its
> JEDEC ID. All further information should be fetched from SFDP. For 
> this,
> introduce a SNOR_ID3() macro which should be used for all new flashes 
> with
> SFDP.
> 
> The dropped information are page size, number of sectors and sector 
> size.
> The number of sectors (together with sector size) is only used to 
> calculate
> the total flash size. In case of SFDP, this is read from there. The 
> sector
> size is also used to select a proper erase opcode. We can just keep 
> that
> one zero and the selection algorithm will select the same erase opcode;
> that is the opcode for the largest erase size (which is btw rather 
> odd..).
> The page size is also taken from SFDP. There is one exception: older 
> SFDP
> tables. These doesn't contain this data. So if there will be flashes 
> with
> that, we should assume some sane value.
> 
> Shaik, could you please re-test your w25q512nwm support with this 
> patch. I
> read through the SFDP data and it should behave exactly the same as 
> before.
> 
> Michael Walle (2):
>   mtd: spi-nor: introduce SNOR_ID3()
>   mtd: spi-nor: winbond: use SNOR_ID3() for w25q512nwm
> 
>  drivers/mtd/spi-nor/core.c    | 7 +++++--
>  drivers/mtd/spi-nor/core.h    | 9 +++++++++
>  drivers/mtd/spi-nor/winbond.c | 3 +--
>  3 files changed, 15 insertions(+), 4 deletions(-)