[PATCH 1/2] mtd: spi-nor: introduce SNOR_ID3()

[Michael Walle]

Up until now, flashes were defined by specifying the JEDEC ID, the
sector size and the number of sectors. This can be read by parsing the
SFDP, we don't have to specify it. Thus provide a new macro SNOR_ID3()
which just takes the JEDEC ID and implicitly set .parse_sfdp = true. All
new flashes which have SFDP should use this macro.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 drivers/mtd/spi-nor/core.c | 7 +++++--
 drivers/mtd/spi-nor/core.h | 9 +++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 402b37cdbcea..29329ed0a934 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2104,8 +2104,11 @@ static int spi_nor_select_pp(struct spi_nor *nor,
  * spi_nor_select_uniform_erase() - select optimum uniform erase type
  * @map:		the erase map of the SPI NOR
  * @wanted_size:	the erase type size to search for. Contains the value of
- *			info->sector_size or of the "small sector" size in case
- *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
+ *			info->sector_size, the "small sector" size in case
+ *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined or 0 if
+ *			there is no information about the sector size. The
+ *			latter is the case if the flash parameters are parsed
+ *			solely by SFDP.
  *
  * Once the optimum uniform sector erase command is found, disable all the
  * other.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 61886868cd02..fab3038c4f4a 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -563,6 +563,15 @@ struct flash_info {
 			.n_regions = (_n_regions),			\
 		},
 
+#define SNOR_ID3(_jedec_id)						\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			},						\
+		.id_len = 3,						\
+		.parse_sfdp = true,					\
+
 #define PARSE_SFDP							\
 	.parse_sfdp = true,						\
 
-- 
2.30.2