[RFC v2 2/2] arm: hisi: enable Hi3521a soc

[Krzysztof Kozlowski]

On 03/05/2022 17:51, Marty E. Plummer wrote:
>>>> A bit weird interrupts... the same?
>>>>
>>> Yes, though I am aware that some sp804 timers do have a separate
>>> interrupts per pair.
>>
>> They have also separate interrupts, one combined interrupt or one sole
>> interrupt. However what you described here is one interrupt line
>> physically connected to two separate pins on the device yet still not
>> being somehow shared (shared as "combined interrupt"). I don't think it
>> is your case...
>>
> Unsure. datasheet just says '33 | Timer0/Timer1'. I don't think these
> timers are attached to pins, however.

So it looks like a combined interrupt, doesn't it?


Best regards,
Krzysztof