[RFC PATCH 1/2] spi: Add multiple CS support for a single SPI device

[Mark Brown]

On Thu, Jun 23, 2022 at 11:39:19AM +0000, Mahapatra, Amit Kumar wrote:

> > >  	/* Mode (clock phase/polarity/etc.) */
> > >  	if (of_property_read_bool(nc, "spi-cpha"))

> > This is changing the DT binding but doesn't have any updates to the binding
> > document.  The binding code also doesn't validate that we don't have too
> > many chip selects.

> The following updates are done in the binding documents for adding multiple
> CS support:
> In jedec,spi-nor.yaml file " maxItems " of the "reg" DT property has been 
> updated to accommodate two CS per SPI device.  

This is a change to a binding for a specific driver, this is changing
the SPI core.

> > I'm also not seeing anything here that checks that the driver supports
> > multiple chip selects - it seems like something that's going to cause issues
> > and we should probably have something to handle that situation.

> In my approach the chip select member (chip_select) of the spi_device structure 
> is changed to an array (chip_select[2]). This array is used to store the CS values 
> coming from the "reg" DT property. 
> In case of multiple chip selects  spi->chip_slect[0] will hold CS0 value & 
> spi->chip_select[1] wil hold CS1 value.
> In case of single chip select the spi->chip_select[0] will hold the chip select value.

That doesn't address the issue, the issue is checking that the driver
can support multiple chip selects.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20220623/ee378d21/attachment-0001.sig>