[PATCH 1/2] mtd: spi-nor: spansion: Replace hardcoded values for addr_nbytes/addr_mode_nbytes

Tudor Ambarus tudor.ambarus at microchip.com
Wed Jul 27 21:14:50 PDT 2022


We track in the core the internal address mode of the flash. Stop using
hardcoded values for the number of bytes of address and use
nor->addr_nbytes and nor->params->addr_mode_nbytes instead.

Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 drivers/mtd/spi-nor/spansion.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 0150049007be..676ffd6d12ec 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -49,11 +49,13 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	struct spi_mem_op op;
 	u8 *buf = nor->bouncebuf;
 	int ret;
+	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
 
 	/* Use 24 dummy cycles for memory array reads. */
 	*buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24;
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR2V, 1, buf);
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR2V, 1, buf);
 
 	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
 	if (ret)
@@ -64,14 +66,16 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	/* Set the octal and DTR enable bits. */
 	buf[0] = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN;
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR5V, 1, buf);
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR5V, 1, buf);
 
 	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
 	if (ret)
 		return ret;
 
 	/* Read flash ID to make sure the switch was successful. */
-	ret = spi_nor_read_id(nor, 4, 3, buf, SNOR_PROTO_8_8_8_DTR);
+	ret = spi_nor_read_id(nor, nor->addr_nbytes, 3, buf,
+			      SNOR_PROTO_8_8_8_DTR);
 	if (ret) {
 		dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
 		return ret;
@@ -97,7 +101,8 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	buf[0] = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS;
 	buf[1] = 0;
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(4, SPINOR_REG_CYPRESS_CFR5V, 2, buf);
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->addr_nbytes,
+					  SPINOR_REG_CYPRESS_CFR5V, 2, buf);
 	ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
 	if (ret)
 		return ret;
@@ -191,7 +196,8 @@ static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
 static int cypress_nor_set_page_size(struct spi_nor *nor)
 {
 	struct spi_mem_op op =
-		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
+		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR3V,
 					  nor->bouncebuf);
 	int ret;
 
-- 
2.25.1




More information about the linux-mtd mailing list