[PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA

[William Zhang]

Now that Broadcom Broadband arch ARCH_BCMBCA is in the kernel, this
patch series migrates the existing broadband chip BCM4908 support to
ARCH_BCMBCA.

William Zhang (9):
  dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  dt-bindings: arm64: bcmbca: Update BCM4908 description
  arm64: dts: bcmbca: update BCM4908 board dts files
  arm64: dts: Move BCM4908 dts to bcmbca folder
  arm64: dts: Add BCM4908 generic board dts
  arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  arm64: defconfig: remove BCM4908

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 25 +++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm64/Kconfig.platforms                  | 10 +----
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  5 ---
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  5 +++
 .../bcm4906-netgear-r8000p.dts                |  2 +-
 .../bcm4906-tplink-archer-c2300-v1.dts        |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi |  0
 .../bcm4908-asus-gt-ac5300.dts                |  2 +-
 .../bcm4908-netgear-raxe500.dts               |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi |  0
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++
 arch/arm64/configs/defconfig                  |  1 -
 drivers/i2c/busses/Kconfig                    |  4 +-
 drivers/mtd/parsers/Kconfig                   |  6 +--
 drivers/net/ethernet/broadcom/Kconfig         |  4 +-
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/phy/broadcom/Kconfig                  |  4 +-
 drivers/pinctrl/bcm/Kconfig                   |  4 +-
 drivers/reset/Kconfig                         |  2 +-
 drivers/soc/bcm/bcm63xx/Kconfig               |  4 +-
 drivers/tty/serial/Kconfig                    |  4 +-
 drivers/watchdog/Kconfig                      |  2 +-
 25 files changed, 84 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

-- 
2.34.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20220720/27cebbbb/attachment.p7s>