[PATCH] mtd: spi-nor: winbond: add support for W25Q512NW-IQ/IN

[Michael Walle]

Hi,

Am 2022-07-13 23:01, schrieb Jae Hyun Yoo:
> On 7/13/2022 7:32 AM, Michael Walle wrote:
>> Am 2022-07-13 16:26, schrieb Jae Hyun Yoo:
>>>>> +    { "w25q512nwq", INFO(0xef6020, 0, 64 * 1024, 1024)
>>>> 
>>>> Please use INFO(0xef6020, 0, 0, 0) and test wether it will still
>>>> work correctly. We will then be able to convert it to SNOR_ID3()
>>>> later.
>>> 
>>> Tested it but it doesn't work with INFO(0xef6020, 0, 0, 0). I'll keep
>>> it as is.
>> 
>> Can you please look into this? I'd expect this to work if the SFDP
>> tables are correct because all this should come from the tables.
>> You can look at /sys/kernel/debug/spi-nor/spi0.0/params and see
>> what is changing there.
> 
> I tested it again but result is still the same. I can check the parsed
> info like below if I use INFO(0xef6020, 0, 64 * 1024, 1024) but I can't
> even check the debugfs info if I use INFO(0xef6020, 0, 0, 0) since it
> doesn't boot at all. I think, this patch should go as is and the size
> parsing issue could be fixed using a separate fix.

What does "doesn't boot at all" mean? Are there any kernel startup
messages?

Just to be sure, you have PARSE_SFDP set, right?

The entry should be (skipping OTP to make sure that isn't
the problem here):
{ "w25q512nwq", INFO(0xef6020, 0, 0, 0) PARSE_SFDP }

-michael