[PATCH v2 2/4] mtd: rawnand: stm32_fmc2: Add NAND Write Protect support

[Christophe Kerello]

This patch adds the support of the WP# signal. WP will be disabled in
probe/resume callbacks and will be enabled in remove/suspend callbacks.

Signed-off-by: Christophe Kerello <christophe.kerello at foss.st.com>
---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 +++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 97b4e02e43e4..87c1c7dd97eb 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -9,6 +9,7 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
@@ -231,6 +232,7 @@ struct stm32_fmc2_timings {
 
 struct stm32_fmc2_nand {
 	struct nand_chip chip;
+	struct gpio_desc *wp_gpio;
 	struct stm32_fmc2_timings timings;
 	int ncs;
 	int cs_used[FMC2_MAX_CE];
@@ -1747,6 +1749,18 @@ static const struct nand_controller_ops stm32_fmc2_nfc_controller_ops = {
 	.setup_interface = stm32_fmc2_nfc_setup_interface,
 };
 
+static void stm32_fmc2_nfc_wp_enable(struct stm32_fmc2_nand *nand)
+{
+	if (nand->wp_gpio)
+		gpiod_set_value(nand->wp_gpio, 1);
+}
+
+static void stm32_fmc2_nfc_wp_disable(struct stm32_fmc2_nand *nand)
+{
+	if (nand->wp_gpio)
+		gpiod_set_value(nand->wp_gpio, 0);
+}
+
 static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
 				      struct device_node *dn)
 {
@@ -1785,6 +1799,18 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
 		nand->cs_used[i] = cs;
 	}
 
+	nand->wp_gpio = devm_gpiod_get_from_of_node(nfc->dev, dn,
+						    "wp-gpios", 0,
+						    GPIOD_OUT_HIGH, "wp");
+	if (IS_ERR(nand->wp_gpio)) {
+		ret = PTR_ERR(nand->wp_gpio);
+		if (ret != -ENOENT)
+			return dev_err_probe(nfc->dev, ret,
+					     "failed to request WP GPIO\n");
+
+		nand->wp_gpio = NULL;
+	}
+
 	nand_set_flash_node(&nand->chip, dn);
 
 	return 0;
@@ -1956,10 +1982,12 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
 	chip->options |= NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE |
 			 NAND_USES_DMA;
 
+	stm32_fmc2_nfc_wp_disable(nand);
+
 	/* Scan to find existence of the device */
 	ret = nand_scan(chip, nand->ncs);
 	if (ret)
-		goto err_release_dma;
+		goto err_wp_enable;
 
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret)
@@ -1972,6 +2000,9 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
 err_nand_cleanup:
 	nand_cleanup(chip);
 
+err_wp_enable:
+	stm32_fmc2_nfc_wp_enable(nand);
+
 err_release_dma:
 	if (nfc->dma_ecc_ch)
 		dma_release_channel(nfc->dma_ecc_ch);
@@ -2012,15 +2043,20 @@ static int stm32_fmc2_nfc_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(nfc->clk);
 
+	stm32_fmc2_nfc_wp_enable(nand);
+
 	return 0;
 }
 
 static int __maybe_unused stm32_fmc2_nfc_suspend(struct device *dev)
 {
 	struct stm32_fmc2_nfc *nfc = dev_get_drvdata(dev);
+	struct stm32_fmc2_nand *nand = &nfc->nand;
 
 	clk_disable_unprepare(nfc->clk);
 
+	stm32_fmc2_nfc_wp_enable(nand);
+
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
@@ -2042,6 +2078,8 @@ static int __maybe_unused stm32_fmc2_nfc_resume(struct device *dev)
 
 	stm32_fmc2_nfc_init(nfc);
 
+	stm32_fmc2_nfc_wp_disable(nand);
+
 	for (chip_cs = 0; chip_cs < FMC2_MAX_CE; chip_cs++) {
 		if (!(nfc->cs_assigned & BIT(chip_cs)))
 			continue;
-- 
2.25.1