[PATCH v2] mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status

[david regan]

The brcmnand driver contains a bug in which if a page (example 2k byte)
is read from the parallel/ONFI NAND and within that page a subpage (512
byte) has correctable errors which is followed by a subpage with
uncorrectable errors, the page read will return the wrong status of
correctable (as opposed to the actual status of uncorrectable.)

The bug is in function brcmnand_read_by_pio where there is a check for
uncorrectable bits which will be preempted if a previous status for
correctable bits is detected.

The fix is to stop checking for bad bits only if we already have a bad
bits status.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: david regan <dregan at mail.com>
Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index c412f79..703ff00 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2135,7 +2135,7 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 					mtd->oobsize / trans,
 					host->hwcfg.sector_size_1k);

-		if (!ret) {
+		if (ret != -EBADMSG) {
 			*err_addr = brcmnand_get_uncorrecc_addr(ctrl);

 			if (*err_addr)
--
1.8.3.1