[RFC PATCH v3 0/4] Fix and improve gpmi nand on mx28

[Sascha Hauer]

On Mon, Jan 17, 2022 at 05:17:51PM +0100, Dario Binacchi wrote:
> Starting from [1], the series fixes the timings setting of the gpmi
> controller for the mx28 architecture, also adding support for fast
> edo mode timings. The whole series has been heavily tested with the
> mtd kernel test modules, and with repeated write cycles on nand.
> 
> [1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
> 
> Changes in v3:
> - Remove the "mtd: rawnand: gpmi: use a table to get EDO mode setup" patch.
> - Simplify the validation logic (suggested by Sascha Hauer <sha at pengutronix.de>).

Thanks Dario. I gave it a test on a custom i.MX28 board and it works as
expected.

For the series:

Tested-by: Sascha Hauer <s.hauer at pengutronix.de>
Reviewed-by: Sascha Hauer <s.hauer at pengutronix.de>

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |