[PATCH v2 5/9] mtd: rawnand: brcmnand: Allow working without interrupts

Florian Fainelli f.fainelli at gmail.com
Thu Jan 6 16:13:24 PST 2022


The BCMA devices include the brcmnand controller but they do not wire up
any interrupt line, allow the main interrupt to be optional and update
the completion path to also check for the lack of an interrupt line.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 54 +++++++++++-------------
 1 file changed, 24 insertions(+), 30 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index eb3f96489f83..08e2acde5133 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -216,7 +216,7 @@ struct brcmnand_controller {
 	void __iomem		*nand_base;
 	void __iomem		*nand_fc; /* flash cache */
 	void __iomem		*flash_dma_base;
-	unsigned int		irq;
+	int			irq;
 	unsigned int		dma_irq;
 	int			nand_version;
 
@@ -1610,7 +1610,7 @@ static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
 	bool err = false;
 	int sts;
 
-	if (mtd->oops_panic_write) {
+	if (mtd->oops_panic_write || ctrl->irq < 0) {
 		/* switch to interrupt polling and PIO mode */
 		disable_ctrl_irqs(ctrl);
 		sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
@@ -3144,35 +3144,29 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 	}
 
 	/* IRQ */
-	ctrl->irq = platform_get_irq(pdev, 0);
-	if ((int)ctrl->irq < 0) {
-		dev_err(dev, "no IRQ defined\n");
-		ret = -ENODEV;
-		goto err;
-	}
-
-	/*
-	 * Some SoCs integrate this controller (e.g., its interrupt bits) in
-	 * interesting ways
-	 */
-	if (soc) {
-		ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
-				       DRV_NAME, ctrl);
+	ctrl->irq = platform_get_irq_optional(pdev, 0);
+	if (ctrl->irq > 0) {
+		/*
+		 * Some SoCs integrate this controller (e.g., its interrupt bits) in
+		 * interesting ways
+		 */
+		if (soc) {
+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+					       DRV_NAME, ctrl);
 
-		/* Enable interrupt */
-		ctrl->soc->ctlrdy_ack(ctrl->soc);
-		ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
-		if (brcmnand_soc_has_ops(soc))
-			static_branch_enable(&brcmnand_soc_has_ops_key);
-	} else {
-		/* Use standard interrupt infrastructure */
-		ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
-				       DRV_NAME, ctrl);
-	}
-	if (ret < 0) {
-		dev_err(dev, "can't allocate IRQ %d: error %d\n",
-			ctrl->irq, ret);
-		goto err;
+			/* Enable interrupt */
+			ctrl->soc->ctlrdy_ack(ctrl->soc);
+			ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+		} else {
+			/* Use standard interrupt infrastructure */
+			ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+					       DRV_NAME, ctrl);
+		}
+		if (ret < 0) {
+			dev_err(dev, "can't allocate IRQ %d: error %d\n",
+				ctrl->irq, ret);
+			goto err;
+		}
 	}
 
 	for_each_available_child_of_node(dn, child) {
-- 
2.25.1




More information about the linux-mtd mailing list