[PATCH 4/9] mtd: rawnand: brcmnand: Move OF operations out of brcmnand_init_cs()
Miquel Raynal
miquel.raynal at bootlin.com
Mon Jan 3 08:56:06 PST 2022
Hi Florian,
f.fainelli at gmail.com wrote on Wed, 22 Dec 2021 16:22:20 -0800:
> In order to initialize a given chip select object for use by the
> brcmnand driver, move all of the Device Tree specific routines outside
> of brcmnand_init_cs() in order to make it usable in a platform data
> configuration which will be necessary for supporting BCMA chips.
TBH I'm note a big fan of the idea. I'm not sure going back to
supporting platform data this way really is a good idea... There are so
much things that are well described with DT that we now rely upon that
I am not entirely convinced by these changes :-/ The move is generally
in the other direction: getting rid of the legacy platform data.
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
Cheers,
Miquèl
> ---
> drivers/mtd/nand/raw/brcmnand/brcmnand.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> index 35f8d8e02d4a..60a7f375df83 100644
> --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> @@ -2760,7 +2760,7 @@ static const struct nand_controller_ops brcmnand_controller_ops = {
> .attach_chip = brcmnand_attach_chip,
> };
>
> -static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
> +static int brcmnand_init_cs(struct brcmnand_host *host)
> {
> struct brcmnand_controller *ctrl = host->ctrl;
> struct device *dev = ctrl->dev;
> @@ -2769,16 +2769,9 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
> int ret;
> u16 cfg_offs;
>
> - ret = of_property_read_u32(dn, "reg", &host->cs);
> - if (ret) {
> - dev_err(dev, "can't get chip-select\n");
> - return -ENXIO;
> - }
> -
> mtd = nand_to_mtd(&host->chip);
> chip = &host->chip;
>
> - nand_set_flash_node(chip, dn);
> nand_set_controller_data(chip, host);
> mtd->name = devm_kasprintf(dev, GFP_KERNEL, "brcmnand.%d",
> host->cs);
> @@ -3179,7 +3172,16 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
> host->pdev = pdev;
> host->ctrl = ctrl;
>
> - ret = brcmnand_init_cs(host, child);
> + ret = of_property_read_u32(dn, "reg", &host->cs);
> + if (ret) {
> + dev_err(dev, "can't get chip-select\n");
> + devm_kfree(dev, host);
> + continue;
> + }
> +
> + nand_set_flash_node(&host->chip, dn);
> +
> + ret = brcmnand_init_cs(host);
> if (ret) {
> devm_kfree(dev, host);
> continue; /* Try all chip-selects */
More information about the linux-mtd
mailing list