[PATCH v6 14/28] mtd: nand: mxic-ecc: Add Macronix external ECC engine support

[Geert Uytterhoeven]

Hi Miquel,

On Thu, Dec 16, 2021 at 12:48 PM Miquel Raynal
<miquel.raynal at bootlin.com> wrote:
> Some SPI-NAND chips do not support on-die ECC. For these chips,
> correction must apply on the SPI controller end. In order to avoid
> doing all the calculations by software, Macronix provides a specific
> engine that can offload the intensive work.
>
> Add Macronix ECC engine support, this engine can work in conjunction
> with a SPI controller and a raw NAND controller, it can be pipelined
> or external and supports linear and syndrome layouts.
>
> Right now the simplest configuration is supported: SPI controller
> external and linear ECC engine.
>
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>

Thanks for your patch!

> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -46,6 +46,12 @@ config MTD_NAND_ECC_SW_BCH
>           ECC codes. They are used with NAND devices requiring more than 1 bit
>           of error correction.
>
> +config MTD_NAND_ECC_MXIC
> +       bool "Macronix external hardware ECC engine"
> +       select MTD_NAND_ECC
> +       help
> +         This enables support for the hardware ECC engine from Macronix.

I guess this is a licensable IP core, which can appear anywhere, so
we don't have a proper platform dependency to add here?

> +
>  endmenu
>
>  endmenu

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds