[BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1

Tokunori Ikegami ikegami.t at gmail.com
Mon Feb 14 10:46:18 PST 2022


Hi Ahmad-san,

On 2022/02/15 1:22, Ahmad Fatoum wrote:
> Hello Tokunori-san,
>
> On 13.02.22 17:47, Tokunori Ikegami wrote:
>> Hi Ahmad-san,
>>
>> Thanks for your confirmations. Sorry for late to reply.
> No worries. I appreciate you taking the time.
>
>> Could you please try the patch attached to disable the chip_good() change as before?
>> I think this should work for S29GL964N since the chip_ready() is used and works as mentioned.
> yes, this resolves my issue:
> Tested-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
Thanks for your testing. I have just sent the patch to review.
>
>>>>> Doesn't seem to be a buffered write issue here though as the writes
>>>>> did work fine before dfeae1073583. Any other ideas?
>>>> At first I thought the issue is possible to be resolved by using the word write instead of the buffered writes.
>>>> Now I am thinking to disable the changes dfeae1073583 partially with any condition if possible.
>>> What seems to work for me is checking if chip_good or chip_ready
>>> and map_word is equal to 0xFF. I can't justify why this is ok though.
>>> (Worst case bus is floating at this point of time and Hi-Z is read
>>> as 0xff on CPU data lines...)
>> Sorry I am not sure about this.
>> I thought the chip_ready() itself is correct as implemented as the data sheet in the past.
>> But it did not work correctly so changed to use chip_good() instead as it is also correct.
> What exactly in the datasheet makes you believe chip_good is not appropriate?
I just mentioned about the actual issue behaviors as not worked 
chip_good() on S29GL964N and not worked chip_ready() on 
MX29GL512FHT2I-11G before etc.
Anyway let me recheck the data sheet details as just checked it again 
quickly but needed more investigation to understand.

Regards,
Ikegami

>
> Cheers,
> Ahmad
>
>



More information about the linux-mtd mailing list