[PATCH] mtd: rawnand: pl353: Set the nand chip node as the flash node

[Amit Kumar Mahapatra]

In devicetree the flash information is embedded within nand chip node,
so during nand chip initialization the nand chip node should be passed
to nand_set_flash_node() api, instead of nand controller node.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra at xilinx.com>
---
BRANCH: nand/next
---
 drivers/mtd/nand/raw/pl35x-nand-controller.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/pl35x-nand-controller.c b/drivers/mtd/nand/raw/pl35x-nand-controller.c
index 8a91e069ee2e..3c6f6aff649f 100644
--- a/drivers/mtd/nand/raw/pl35x-nand-controller.c
+++ b/drivers/mtd/nand/raw/pl35x-nand-controller.c
@@ -1062,7 +1062,7 @@ static int pl35x_nand_chip_init(struct pl35x_nandc *nfc,
 	chip->controller = &nfc->controller;
 	mtd = nand_to_mtd(chip);
 	mtd->dev.parent = nfc->dev;
-	nand_set_flash_node(chip, nfc->dev->of_node);
+	nand_set_flash_node(chip, np);
 	if (!mtd->name) {
 		mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL,
 					   "%s", PL35X_NANDC_DRIVER_NAME);
-- 
2.17.1