[PATCH v1 02/14] mtd: spi-nor: slightly refactor the spi_nor_setup()

Michael Walle michael at walle.cc
Wed Feb 2 06:58:41 PST 2022


Instead of always using a function pointer (and initializing it to our
default), just call the default function if the flash didn't set its own
one. That will make the call flow easier to follow.

Also mark the parameter as optional now.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 drivers/mtd/spi-nor/core.c | 10 +++++-----
 drivers/mtd/spi-nor/core.h |  8 ++++----
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index f05ece6018dc..c8cc906cf771 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2532,11 +2532,12 @@ static int spi_nor_setup(struct spi_nor *nor,
 {
 	int ret;
 
-	if (nor->params->setup) {
+	if (nor->params->setup)
 		ret = nor->params->setup(nor, hwcaps);
-		if (ret)
-			return ret;
-	}
+	else
+		ret = spi_nor_default_setup(nor, hwcaps);
+	if (ret)
+		return ret;
 
 	return spi_nor_set_addr_width(nor);
 }
@@ -2786,7 +2787,6 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 
 	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
 	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
-	params->setup = spi_nor_default_setup;
 	params->otp.org = &info->otp_org;
 
 	/* Default to 16-bit Write Status (01h) Command */
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index c6578d3f598b..10f478547dc2 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -257,10 +257,10 @@ struct spi_nor_otp {
  * @convert_addr:	converts an absolute address into something the flash
  *                      will understand. Particularly useful when pagesize is
  *                      not a power-of-2.
- * @setup:              configures the SPI NOR memory. Useful for SPI NOR
- *                      flashes that have peculiarities to the SPI NOR standard
- *                      e.g. different opcodes, specific address calculation,
- *                      page size, etc.
+ * @setup:		(optional) configures the SPI NOR memory. Useful for
+ *			SPI NOR flashes that have peculiarities to the SPI NOR
+ *			standard e.g. different opcodes, specific address
+ *			calculation, page size, etc.
  * @locking_ops:	SPI NOR locking methods.
  */
 struct spi_nor_flash_parameter {
-- 
2.30.2




More information about the linux-mtd mailing list