[PATCH] mtd: nand: raw: qcom_nandc: Don't clear_bam_transaction on READID

Sricharan Ramabadhran sricharan at codeaurora.org
Tue Feb 1 23:24:42 PST 2022


Hi Konrad/Miquel,

On 2/1/2022 9:21 PM, Konrad Dybcio wrote:
>
> On 01/02/2022 14:52, Miquel Raynal wrote:
>> Hi Konrad,
>>
>> konrad.dybcio at somainline.org wrote on Mon, 31 Jan 2022 20:54:12 +0100:
>>
>>> On 31/01/2022 15:13, Sricharan Ramabadhran wrote:
>>>> Hi Konrad,
>>>>
>>>> On 1/31/2022 3:39 PM, Konrad Dybcio wrote:
>>>>> On 28/01/2022 18:50, Sricharan Ramabadhran wrote:
>>>>>> Hi Konrad,
>>>>>>
>>>>>> On 1/28/2022 9:55 AM, Sricharan Ramabadhran wrote:
>>>>>>> Hi Miquel,
>>>>>>>
>>>>>>> On 1/26/2022 4:12 PM, Miquel Raynal wrote:
>>>>>>>> Hi Mani,
>>>>>>>>
>>>>>>>> mani at kernel.org wrote on Wed, 26 Jan 2022 16:03:16 +0530:
>>>>>>>>> On Wed, Jan 26, 2022 at 11:16:13AM +0100, Miquel Raynal wrote:
>>>>>>>>>> Hello,
>>>>>>>>>>
>>>>>>>>>> miquel.raynal at bootlin.com wrote on Fri, 14 Jan 2022 08:27:18 
>>>>>>>>>> +0100:
>>>>>>>>>>> Hi Konrad,
>>>>>>>>>>>
>>>>>>>>>>> konrad.dybcio at somainline.org wrote on Thu, 13 Jan 2022 
>>>>>>>>>>> 19:44:26 >>>>>>>> +0100:
>>>>>>>>>>>> While I have absolutely 0 idea why and how, running 
>>>>>>>>>>>> >>>>>>>>> clear_bam_transaction
>>>>>>>>>>>> when READID is issued makes the DMA totally clog up and 
>>>>>>>>>>>> refuse >>>>>>>>> to function
>>>>>>>>>>>> at all on mdm9607. In fact, it is so bad that all the data 
>>>>>>>>>>>> >>>>>>>>> gets garbled
>>>>>>>>>>>> and after a short while in the nand probe flow, the CPU 
>>>>>>>>>>>> >>>>>>>>> decides that
>>>>>>>>>>>> sepuku is the only option.
>>>>>>>>>>>>
>>>>>>>>>>>> Removing _READID from the if condition makes it work like a 
>>>>>>>>>>>> >>>>>>>>> charm, I can
>>>>>>>>>>>> read data and mount partitions without a problem.
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at somainline.org>
>>>>>>>>>>>> ---
>>>>>>>>>>>> This is totally just an observation which took me an 
>>>>>>>>>>>> inhumane >>>>>>>>> amount of
>>>>>>>>>>>> debug prints to find.. perhaps there's a better reason 
>>>>>>>>>>>> behind >>>>>>>>> this, but
>>>>>>>>>>>> I can't seem to find any answers.. Therefore, this is a BIG 
>>>>>>>>>>>> RFC!
>>>>>>>>>>> I'm adding two people from codeaurora who worked a lot on 
>>>>>>>>>>> this >>>>>>>> driver.
>>>>>>>>>>> Hopefully they will have an idea :)
>>>>>>>>>> Sadre, I've spent a significant amount of time reviewing your 
>>>>>>>>>> >>>>>>> patches,
>>>>>>>>>> now it's your turn to not take a month to answer to your peers
>>>>>>>>>> proposals.
>>>>>>>>>>
>>>>>>>>>> Please help reviewing this patch.
>>>>>>>>> Sorry. I was hoping that Qcom folks would chime in as I don't 
>>>>>>>>> >>>>>> have any idea
>>>>>>>>> about the mdm9607 platform. It could be that the mail server 
>>>>>>>>> >>>>>> migration from
>>>>>>>>> codeaurora to quicinc put a barrier here.
>>>>>>>>>
>>>>>>>>> Let me ping them internally.
>>>>>>>> Oh, ok, I didn't know. Thanks!
>>>>>>>     Sorry Miquel, somehow we did not get this email in our inbox.
>>>>>>>     Thanks to Mani for pinging us, we will test this up today 
>>>>>>> and >>>> get back.
>>>>>>        While we could not reproduce this issue on our ipq boards 
>>>>>> (do >>> not have a mdm9607 right now) and
>>>>>>         issue does not look any obvious.
>>>>>>        can you please give the debug logs that you did for the 
>>>>>> above >>> stage by stage ?
>>>>> I won't have access to the board for about two weeks, sorry.
>>>>>
>>>>> When I get to it, I'll surely try to send you the logs, though there
>>>>>
>>>>> wasn't much more than just something jumping to who-knows-where
>>>>>
>>>>> after clear_bam_transaction was called, resulting in values >> 
>>>>> associated with
>>>>>
>>>>> the NAND being all zeroed out in pr_err/_debug/etc.
>>>>>
>>>>      Ok sure. So was the READID command itself failing (or) the > 
>>>> subsequent one ?
>>>>     We can check which parameter reset by the clear_bam_transaction 
>>>> is > causing the
>>>>     failure.  Meanwhile, looping in Pradeep who has access to the > 
>>>> board, so in a better
>>>>     position to debug.
>>> I'm sorry I have so few details on hand, and no kernel tree (no 
>>> access to that machine either, for now).
>>>
>>>
>>> I will try to describe to the best of my abilities what I recall.
>>>
>>>
>>> My methodology of making sure things don't go haywire was to print 
>>> the oob size
>>>
>>> of our NAND basically every two lines of code (yes, i was very 
>>> desperate at one point),
>>>
>>> as that was zeroed out when *the bug* happened,
>> This does look like a pointer error at some point and some kernel data
>> has been corrupted very badly by the driver.
>>
>>> leading to a kernel bug/panic/stall
>>>
>>> (can't recall what exactly it was, but it said something along the 
>>> lines of "no support for
>>>
>>> oob size 0" and then it didn't fail graceully, leading to some bad 
>>> jumps and ultimately
>>>
>>> a dead platform..)
>>>
>>>
>>> after hours of digging, I found out that everything goes fine until 
>>> clear_bam_transaction is called,
>> Do you remember if this function was called for the first time when
>> this happened?
>
> I think so, if I recall correctly there are no more callers in this 
> path, as readid is the first nand command executed in flash probe flow.
>
>
>
>>
>>> after that gets executed every nand op starts reading all zeroes 
>>> (for example in JEDEC ID check)
>>>
>>> so I added the changes from this patch, and things magically started 
>>> working... My suspicion is
>>>
>>> that the underlying FIFO isn't fully drained (is it a FIFO on 9607? 
>>> bah, i work on too many socs at once)
>> I don't see it in the list of supported devices, what's the exact
>> compatible used?
>
> qcom,ipq4019-nand
>
>
>
>>
>>> and this function only makes Linux think it is, without actually 
>>> draining it, and the leftover
>>>
>>> commands get executed with some parts of them getting overwritten, 
>>> resulting in the
>>>
>>> famous garbage in - garbage out situation, but that's only a 
>>> guesstimate..
>> I would bet for a non allocated bam-ish pointer that is reset to zero
>> in the clear_bam_transaction() helper.
>>
>> Can you get your hands on the board again?
>
> Sure, but as I mentioned previously, only in about 2 weeks, I can't 
> really do any dev before then.. :(
>
>
>
>> It would be nice to check if the allocation always occurs before use,
>> and if yes on how much bytes.
>>
>> If the pointer is not dangling, then perhaps something else smashes
>> that pointer.
>
>
> Konrad
>
>>
>>> Do note this somehow worked fine on 5.11 and then broke on 5.12/13. 
>>> I went as far as replacing most
>>>
>>> of the kernel with the updated/downgraded parts via git checkout (i 
>>> tried many combinations),
>>>
>>> to no avail.. I even tried different compilers and optimization 
>>> levels, thinking it could have been
>>>
>>> a codegen issue, but no luck either.
>>>
>>>
>>> I.. do understand this email is a total mess to read, as much as it 
>>> was to write, but
>>>
>>> without access to my code and the machine itself I can't give you 
>>> solid details, and
>>>
>>> the fact this situation is far from ordinary doesn't help either..
>>>
>>>
>>> The latest (ancient, not quite pretty, but probably working if my 
>>> memory is correct) version of my patches
>>>
>>> for the mdm9607 is available at [1], I will push the new revision 
>>> after I get access to the workstation.
>>>
   + few more who have access to the board.

    Going by the description, for kernel corruption, we can try out a 
KASAN build.
    Since you have mentioned it worked till 5.11, you bisected the 
driver till 5.11 head and it worked ?

Regards,
    Sricharan







More information about the linux-mtd mailing list