[PATCH v2 2/2] dt-bindings: snps,dw-apb-ssi: Use 'flash' node name instead of 'spi-flash' in example

[Rob Herring]

On Mon, Sep 20, 2021 at 07:57:13PM +0530, Apurva Nandan wrote:
> Change the nodename in the example with spi-nand from 'spi-flash at 1'
> to 'flash at 1' to make the schema uniform with both spi-nand and spi-nor
> flashes. jedec,spi-nor.yaml uses 'flash@' nodename for spi-nor flashes,
> so make the spi-nand examples in dt-bindings use it too for uniformity.
> 
> Signed-off-by: Apurva Nandan <a-nandan at ti.com>
> ---
>  Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Fixes should come first. Maybe Mark can apply this before you respin.

Acked-by: Rob Herring <robh at kernel.org>

> 
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> index ca91201a9926..d7e08b03e204 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
> @@ -171,7 +171,7 @@ examples:
>        cs-gpios = <&gpio0 13 0>,
>                   <&gpio0 14 0>;
>        rx-sample-delay-ns = <3>;
> -      spi-flash at 1 {
> +      flash at 1 {
>          compatible = "spi-nand";
>          reg = <1>;
>          rx-sample-delay-ns = <7>;
> -- 
> 2.25.1
> 
>