[PATCH v2 2/5] mtd: rawnand/davinci: Avoid duplicated page read

[Paul Cercueil]

The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.

Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.

Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.

Cc: <stable at vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul at crapouillou.net>
---
 drivers/mtd/nand/raw/davinci_nand.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 89de24d3bb7a..2e6a0c1671be 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -401,7 +401,8 @@ static int nand_davinci_read_page_hwecc_oob_first(struct nand_chip *chip,
 	if (ret)
 		return ret;
 
-	ret = nand_read_page_op(chip, page, 0, NULL, 0);
+	/* Move read cursor to start of page */
+	ret = nand_change_read_column_op(chip, 0, NULL, 0, false);
 	if (ret)
 		return ret;
 
-- 
2.33.0