[RFC PATCH 1/2] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6

[Stefan Riedmueller]

There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.

Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 4d08e4ab5c1b..a1f7000f033e 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1034,15 +1034,6 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6(this))
-		/*
-		 * Set the default value for the gpmi clock.
-		 *
-		 * If you want to use the ONFI nand which is in the
-		 * Synchronous Mode, you should change the clock as you need.
-		 */
-		clk_set_rate(r->clock[0], 22000000);
-
 	return 0;
 
 err_clock:
-- 
2.25.1