[PATCH v2 03/20] dt-bindings: mtd: nand-chip: Create a NAND chip description
Miquel Raynal
miquel.raynal at bootlin.com
Fri Nov 26 03:39:07 PST 2021
Move the NAND chip description out of the NAND controller file. Indeed,
a subsequent part of the properties supported by a raw NAND chip are
also supported by SPI-NAND chips. So let's create a generic NAND chip
description which will be pulled by nand-controller.yaml and later by
spi-nand.yaml as well.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
.../devicetree/bindings/mtd/nand-chip.yaml | 71 +++++++++++++++++++
.../bindings/mtd/nand-controller.yaml | 53 ++------------
2 files changed, 75 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/nand-chip.yaml
diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
new file mode 100644
index 000000000000..6d13e8cdbb21
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+ - Miquel Raynal <miquel.raynal at bootlin.com>
+
+description: |
+ This file covers the generic description of a NAND chip. It implies that the
+ bus interface should not be taken into account: both raw NAND devices and
+ SPI-NAND devices are concerned by this description.
+
+properties:
+ reg:
+ description:
+ Contains the chip-select IDs.
+
+ nand-ecc-engine:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle on the hardware ECC engine if any. There are
+ basically three possibilities:
+ 1/ The ECC engine is part of the NAND controller, in this
+ case the phandle should reference the parent node.
+ 2/ The ECC engine is part of the NAND part (on-die), in this
+ case the phandle should reference the node itself.
+ 3/ The ECC engine is external, in this case the phandle should
+ reference the specific ECC engine node.
+
+ nand-use-soft-ecc-engine:
+ type: boolean
+ description: Use a software ECC engine.
+
+ nand-no-ecc-engine:
+ type: boolean
+ description: Do not use any ECC correction.
+
+ nand-ecc-algo:
+ description:
+ Desired ECC algorithm.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [hamming, bch, rs]
+
+ nand-ecc-strength:
+ description:
+ Maximum number of bits that can be corrected per ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+ nand-ecc-step-size:
+ description:
+ Number of data bytes covered by a single ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+ secure-regions:
+ $ref: /schemas/types.yaml#/definitions/uint64-matrix
+ description:
+ Regions in the NAND chip which are protected using a secure element
+ like Trustzone. This property contains the start address and size of
+ the secure regions present.
+
+required:
+ - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 5cd144a9ec99..44825dc95412 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -52,32 +52,15 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+
+ allOf:
+ - $ref: "nand-chip.yaml#"
+
properties:
reg:
description:
Contains the chip-select IDs.
- nand-ecc-engine:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
- description: |
- A phandle on the hardware ECC engine if any. There are
- basically three possibilities:
- 1/ The ECC engine is part of the NAND controller, in this
- case the phandle should reference the parent node.
- 2/ The ECC engine is part of the NAND part (on-die), in this
- case the phandle should reference the node itself.
- 3/ The ECC engine is external, in this case the phandle should
- reference the specific ECC engine node.
-
- nand-use-soft-ecc-engine:
- type: boolean
- description: Use a software ECC engine.
-
- nand-no-ecc-engine:
- type: boolean
- description: Do not use any ECC correction.
-
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
@@ -88,12 +71,6 @@ patternProperties:
known to be stored in the OOB area, or "interleaved" if ECC
bytes will be interleaved with regular data in the main area.
- nand-ecc-algo:
- description:
- Desired ECC algorithm.
- $ref: /schemas/types.yaml#/definitions/string
- enum: [hamming, bch, rs]
-
nand-bus-width:
description:
Bus width to the NAND chip
@@ -112,18 +89,6 @@ patternProperties:
find Bad Block Markers (BBM). These markers will help to
build a volatile BBT in RAM.
- nand-ecc-strength:
- description:
- Maximum number of bits that can be corrected per ECC step.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
-
- nand-ecc-step-size:
- description:
- Number of data bytes covered by a single ECC step.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
-
nand-ecc-maximize:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -154,13 +119,6 @@ patternProperties:
Ready/Busy pins. Active state refers to the NAND ready state and
should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
- secure-regions:
- $ref: /schemas/types.yaml#/definitions/uint64-matrix
- description:
- Regions in the NAND chip which are protected using a secure element
- like Trustzone. This property contains the start address and size of
- the secure regions present.
-
required:
- reg
@@ -181,9 +139,6 @@ examples:
nand at 0 {
reg = <0>; /* Native CS */
- nand-use-soft-ecc-engine;
- nand-ecc-algo = "bch";
-
/* NAND chip specific properties */
};
--
2.27.0
More information about the linux-mtd
mailing list