[PATCH v3 1/4] mtd: rawnand: Fix nand_erase_op delay

[Herve Codina]

NAND_OP_CMD() expects a delay parameter in nanoseconds.
The delay value is wrongly given in milliseconds.

Fix the conversion macro used in order to set this
delay in nanoseconds.

Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro")
Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation")
Signed-off-by: Herve Codina <herve.codina at bootlin.com>
---
Changes v1 -> v2:
- Commit log reword

Changes v2 -> v3:
- Fix commit log typo
- Added 'Fixes' references

 drivers/mtd/nand/raw/nand_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3d6c6e880520..5c6b065837ef 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -1837,7 +1837,7 @@ int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock)
 			NAND_OP_CMD(NAND_CMD_ERASE1, 0),
 			NAND_OP_ADDR(2, addrs, 0),
 			NAND_OP_CMD(NAND_CMD_ERASE2,
-				    NAND_COMMON_TIMING_MS(conf, tWB_max)),
+				    NAND_COMMON_TIMING_NS(conf, tWB_max)),
 			NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tBERS_max),
 					 0),
 		};
-- 
2.31.1