[PATCH v2 1/4] mtd: rawnand: Fix nand_erase_op delay

Herve Codina herve.codina at bootlin.com
Thu Nov 18 23:39:06 PST 2021


NAND_OP_CMD() expect a delay parameter in nanoseconds.
The delay value is wrongly given in milliseconds.

Fix the conversion macro used in order to set this
delay in nanoseconds.

Signed-off-by: Herve Codina <herve.codina at bootlin.com>
---
Changes v1 -> v2:
- Commit log reword

 drivers/mtd/nand/raw/nand_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3d6c6e880520..5c6b065837ef 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -1837,7 +1837,7 @@ int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock)
 			NAND_OP_CMD(NAND_CMD_ERASE1, 0),
 			NAND_OP_ADDR(2, addrs, 0),
 			NAND_OP_CMD(NAND_CMD_ERASE2,
-				    NAND_COMMON_TIMING_MS(conf, tWB_max)),
+				    NAND_COMMON_TIMING_NS(conf, tWB_max)),
 			NAND_OP_WAIT_RDY(NAND_COMMON_TIMING_MS(conf, tBERS_max),
 					 0),
 		};
-- 
2.31.1




More information about the linux-mtd mailing list