[PATCH v2 2/4] spi: rockchip-sfc: Bindings for Rockchip serial flash controller

Chris Morgan macroalpha82 at gmail.com
Fri May 28 13:01:07 PDT 2021


On Fri, May 28, 2021 at 08:48:29PM +0200, Michael Walle wrote:
> Am 2021-05-28 19:00, schrieb Chris Morgan:
> > From: Chris Morgan <macromorgan at hotmail.com>
> > 
> > Add binding document for the Rockchip serial flash controller.
> > New device specific parameter of rockchip,sfc-no-dma included in
> > documentation.
> > 
> > Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> 
> The subject for this patch should start with "dt-bindings:". See
> Documentation/devicetree/bindings/submitting-patches.rst

Acknowledged. When I do v3 I'll make this change.

> 
> 
> > ---
> >  .../spi/rockchip,serialflash-controller.yaml  | 107 ++++++++++++++++++
> >  1 file changed, 107 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
> > b/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
> > new file mode 100644
> > index 000000000000..eb073130e82a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
> > @@ -0,0 +1,107 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> > http://devicetree.org/schemas/spi/rockchip,serialflash-controller.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Rockchip SoCs Serial FLASH Controller (SFC)
> > +
> > +maintainers:
> > +  - Andy Yan <andy.yan at rock-chips.com>
> > +
> > +allOf:
> > +  - $ref: spi-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: rockchip,px30-sfc
> > +      - const: rockchip,rv1108-sfc
> > +      - items:
> > +        - const: rockchip,sfc
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 2
> > +    items:
> > +      - description: Module Clock
> > +      - description: Bus Clock
> > +
> > +  clock-names:
> > +    minItems: 2
> > +    items:
> > +      - const: clk-sfc
> > +      - const: clk-hsfc
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  rockchip,sfc-no-dma:
> > +    - descrption: Boolean value for disabling DMA
> > +
> > +patternProperties:
> > +  "^spi-nor@[0-3]$":
> 
> I guess this subnode shouldn't be here, because its alread being taken
> care of by the spi-controller.yaml.

Okay, will remove it from v3.

> 
> > +    type: object
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 3
> > +
> > +      spi-max-frequency:
> > +        maxItems: 1
> > +	  - description: Maximum frequency for SPI Flash
> > +
> > +      compatible:
> > +        oneOf:
> > +          - const: jedec,spi-nor
> > +
> > +      spi-rx-bus-width:
> > +        maxItems: 1
> > +          - description: RX Bus Width (1x, 2x, or 4x mode)
> > +
> > +      spi-tx-bus-width:
> > +        maxItems: 1
> > +          - description: TX Bus Width (1x, 2x, or 4x mode)
> > +
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/px30-cru.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +sfc: spi at ff3a0000 {
> > +	compatible = "rockchip,px30-sfc","rockchip,sfc";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +	reg = <0x0 0xff3a0000 0x0 0x4000>;
> > +	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> > +	clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> > +	clock-names = "sfc", "hsfc";
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
> > +	power-domains = <&power PX30_PD_MMC_NAND>;
> > +
> > +	nor_flash: spi-nor at 0 {
> flash at 0 and the reference could probably be dropped.
> 
> > +		reg = <0>;
> > +		compatible = "xtx,xt25f128b","jedec,spi-nor";
> 
> This should only be only "jedec,spi-nor".
>
> You can check the schema with dt_bindings_check, see
> Documentation/devicetree/bindings/writing-schema.rst
> 
> Otherwise, Rob's bot will likely complain.
> 
> Please note, that these review comments are just the obvious
> ones and I don't have much experience with the schemas. Eg.
> the compatible looks fishy, too. But I'm not sure.
> 
> -michael
>

You are correct, I forgot to remove this before I submitted it. I put
the full chip name in there while I was working on this. When I send
v3 (which will come after the main SPI driver has had a chance to be
looked at) I'll make these changes too.

Thank you.
 
> > +		spi-rx-bus-width = <2>;
> > +		spi-tx-bus-width = <2>;
> > +		spi-max-frequency = <108000000>;
> > +	};
> > +};
> > +
> > +...



More information about the linux-mtd mailing list