[PATCH v20 07/19] dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
Miquel Raynal
miquel.raynal at bootlin.com
Wed May 19 11:26:24 PDT 2021
To be fully valid, the NAND controller node in the example should be
named nand-controller instead of flash, should be at the address @0,0
instead of @e1000000 and should have a couple of #address-cells and
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
.../devicetree/bindings/memory-controllers/pl353-smc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index f67715d95852..1335b94291ad 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -34,8 +34,10 @@ Example:
0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
- nand_0: flash at e1000000 {
+ nand0: nand-controller at 0,0 {
compatible = "arm,pl353-nand-r2p1";
reg = <0 0 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
--
2.27.0
More information about the linux-mtd
mailing list