[PATCH 2/3] dt-bindings: mtd: Add a property to declare secure regions in Qcom NANDc

[Manivannan Sadhasivam]

On Fri, Mar 05, 2021 at 05:36:57PM -0600, Rob Herring wrote:
> On Mon, Feb 22, 2021 at 05:32:58PM +0530, Manivannan Sadhasivam wrote:
> > On a typical end product, a vendor may choose to secure some regions in
> > the NAND memory which are supposed to stay intact between FW upgrades.
> > The access to those regions will be blocked by a secure element like
> > Trustzone. So the normal world software like Linux kernel should not
> > touch these regions (including reading).
> > 
> > So let's add a property for declaring such secure regions so that the
> > driver can skip touching them.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> > ---
> >  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > index 84ad7ff30121..7500e20da9c1 100644
> > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > @@ -48,6 +48,13 @@ patternProperties:
> >          enum:
> >            - 512
> >  
> > +      qcom,secure-regions:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> 
> Don't you need 64-bit regions potentially? Though 4GB should be enough 
> for anyone.
> 

Yes, given the size of current NAND based systems around, I thought 32 bit is
enough.

> If more than one addr+size, then you need a matrix.
> 

Okay.

Thanks,
Mani

> > +        description:
> > +          Regions in the NAND memory which are protected using a secure element
> > +          like Trustzone. This property contains the start address and size of
> > +          the secure regions present (optional).
> > +
> >  allOf:
> >    - $ref: "nand-controller.yaml#"
> >  
> > -- 
> > 2.25.1
> >