[PATCH] mtd: spi-nor: esmt: Use correct name of f25l32qa

[Sungbo Eo]

The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is
0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn bits
are non-volatile, unlike its older version.

References: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf
References: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf
Signed-off-by: Sungbo Eo <mans0n at gorani.run>
---
At first I was going to send a new support patch of F25L16PA(2S),
but before that, I wanted to make sure if "(2s)" suffix is okay or unnecessary.
---
 drivers/mtd/spi-nor/esmt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index cfc9218c1053..51b3ff764ef6 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = {
 	/* ESMT */
 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
 			   SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
-			   SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64,
+			       SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
 			   SECT_4K | SPI_NOR_HAS_LOCK) },
 };
-- 
2.32.0