[PATCH v22 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property

[Miquel Raynal]

The SMC bus controller features several register sets. The one pointed
by the reg property is for the SMC configuration (impacts the
sub-controllers configuration), while the others are meant to be used to
send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
device). Detail this a little bit for the sake of clarity.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index ecd46856f139..ba6a5426f62b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
 
 Required properties:
 - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
-- reg			: Controller registers map and length.
+- reg			: SMC controller and sub-controllers configuration
+			  registers.
 - clock-names		: List of input clock names - "memclk", "apb_pclk"
 			  (See clock bindings for details).
 - clocks		: Clock phandles (see clock bindings for details).
-- 
2.27.0