[PATCH v3 1/4] dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash controller
Chris Morgan
macromorgan at hotmail.com
Wed Jun 2 07:49:03 PDT 2021
On Wed, Jun 02, 2021 at 10:13:35AM +0200, Johan Jonker wrote:
> Hi Chris,
>
> Some comments. Have a look if it's useful.
>
All comments are useful. Thank you for your input. :)
> ===
> About the title:
>
> dt-bindings: spi: add Rockchip Serial Flash Controller
>
> Include a driver group name.
> Start with a verb.
> No need to mention "bindings" twice.
>
> ===
>
> In order to get this patch reviewed by rob+dt you must include:
> devicetree at vger.kernel.org
>
> Check your review status here:
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fdevicetree-bindings%2Flist%2F&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210841031%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=KhqRF2ly0Smf%2F1aE7yTrJ4FO5XPldagRW1gI8RF515E%3D&reserved=0
>
> Get the other lists and maintainers with:
> ./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback
> --nogit <patch1> <patch2>
Thank you, for now I've just been using the get_maintainer.pl and trying
not to bother too many people. I'll do this though going forward.
>
> ===
>
> Check document with:
>
> make ARCH=arm dt_binding_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
>
> Remove any errors before submitting.
>
> ===
>
> In this serie you are introducing 4 new compatible strings, then also
> add 4 entries to dtsi files for the completeness.
> Could you give us a complete package?
>
> rockchip,px30-sfc
> rockchip,rk3036-sfc
> rockchip,rk3308-sfc
> rockchip,rv1108-sfc
>
Excluding the px30 I will not be able to test these. Should I just update
the compatible strings and clock names then?
> ARM: dts: rockchip: add sfc node for rv1108
> Copy node from manufacturer tree in rv1108.dtsi
>
> ARM: dts: rockchip: add sfc node for rk3036
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Frockchip-linux%2Fkernel%2Fcommit%2F57bfc68e70cb58bd4786a6baff6315f252a19088&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210841031%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=C5k6bCkt8qlzOquK9rECDN9fTK6HQDzxTR4Vp4othtA%3D&reserved=0
>
> arm64: dts: rockchip: add sfc node for PX30
>
> arm64: dts: rockchip: add sfc node for rk3308
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Frockchip-linux%2Fkernel%2Fcommit%2F036e7e07a41c264a076c70ebf20cfeca031799a0&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210841031%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=NAdFO27S6zQdSjG%2FHMdZfe%2Bx9Nh9VQJhGVAhTopFY7s%3D&reserved=0
>
> Fix there commit message and clock names.
>
> ===
>
> Johan
>
> On 6/1/21 10:10 PM, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan at hotmail.com>
> >
> > Add bindings for the Rockchip serial flash controller. New device
> > specific parameter of rockchip,sfc-no-dma included in documentation.
> >
> > Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> > ---
> > .../devicetree/bindings/spi/rockchip,sfc.yaml | 87 +++++++++++++++++++
> > 1 file changed, 87 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/spi/rockchip,sfc.yaml
> >
>
> > diff --git a/Documentation/devicetree/bindings/spi/rockchip,sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip,sfc.yaml
> > new file mode 100644
> > index 000000000000..d5f8edd621ae
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/rockchip,sfc.yaml
> > @@ -0,0 +1,87 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fspi%2Frockchip%2Csfc.yaml%23&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210841031%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RvUO4cmMOZb9B5l2MtUK3riDKebGLlKWt0KnnKaqENQ%3D&reserved=0
>
> rockchip-sfc.yaml
>
> The comma is only used between <manufacturer>,<SoC name>-<function> I think.
> Ask a maintainer for exact name.
I was basing this off of names like renesas,rspi.yaml and cdns,qspi-nor.yaml,
but this is probably a good question for the maintainers.
>
>
> > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210841031%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=OSRmMArQEVaWsZ%2BnxrqvfmO1pWk6dyjWVTunbw6j1Po%3D&reserved=0
> > +
> > +title: Rockchip Serial Flash Controller (SFC)
> > +
> > +maintainers:
>
> > + - Heiko Stuebner <heiko at sntech.de>
> > + - Chris Morgan <macromorgan at hotmail.com>
>
> sort
> no hotmail because it screws the message-ID
Is that a hard and fast rule? The Hotmail address I will be able to
respond to much quicker. I've actually had that address since before
they got bought by Microsoft. Worst case I can do the gmail I submit
patches from, though, but Hotmail is still preferred by me.
>
> > +
> > +allOf:
> > + - $ref: spi-controller.yaml#
> > +
> > +properties:
> > + compatible:
>
> > + oneOf:
>
> This format is wrong. Use fall back strings.
>
Thank you, I was confused on this one section. I'll try to clean it up
more.
> > + - const: rockchip,px30-sfc
>
> > + - const: rockchip,rk1806-sfc
> > + - const: rockchip,rk1808-sfc
> > + - const: rockchip,rk312x-sfc
>
> remove
> I would advice against introducing compatible strings for boards that we
> don't have support for in mainline. Limit to things that we know what
> they look like.
I was under the impression these were also supported by upstream, but I'll
remove them if they aren't.
>
> > + - const: rockchip,rk3308-sfc
> > + - const: rockchip,rv1108-sfc
> > + - items:
> > + - const: rockchip,rk3036-sfc
>
> oneOf:
> - const: rockchip,rk3036-sfc
> - items:
> - enum:
> - rockchip,px30-sfc
> - rockchip,rk3308-sfc
> - rockchip,rv1108-sfc
> - const: rockchip,rk3036-sfc
>
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
>
> > + - description: Bus Clock
> > + - description: Module Clock
>
> swap
>
> > +
> > + clock-names:
> > + items:
>
> > + - const: ahb
> > + - const: sfc
>
> swap
> You must keep them in the same order as in your example and in the dtsi
> files (both mainline as manufacturer tree).
>
> Maybe use this:
>
> - const: clk
> - const: hclk
Heiko suggested we use clk and ahb as the clock names, to be consistent
with the NAND flash controller hardware.
>
>
> #define HCLK_SFC 257
> #define SCLK_SFC 58
>
> COMPOSITE(SCLK_SFC, "clk_sfc", mux_gpll_cpll_p, 0,
> PX30_CLKSEL_CON(22), 7, 1, MFLAGS, 0, 7, DFLAGS,
> PX30_CLKGATE_CON(6), 7, GFLAGS),
>
> GATE(HCLK_SFC, "hclk_sfc", "hclk_mmc_nand", 0, PX30_CLKGATE_CON(6), 11,
> GFLAGS),
>
> ===
>
> From clk-rk3036.c:
>
> COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
> RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
> RK2928_CLKGATE_CON(10), 5, GFLAGS),
>
>
> GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(3), 14, GFLAGS),
>
> The HCLK_SFC is missing and ignored in rk3036-cru.h and clk-rk3036.c
> Maybe this needs a fix?
It possibly does, but aside from hoping that I'm doing it right I lack the
necessary hardware to test the changes. I can make educated guesses though
by looking at the datasheet and board support package kernel.
>
> #define HCLK_SFC 454
>
> See:
> clk: rockchip: rk3036: export the sfc clocks
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Frockchip-linux%2Fkernel%2Fcommit%2F8373cf713ddd32037dc86462cac2d2d3cc859a99&data=04%7C01%7C%7Cbadb9f60f0114af4d80308d9259e53f6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582184210851028%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=KZiR3s3opSYS6uplRJ%2B726qiFWY5tEfvo6GKAp4w81A%3D&reserved=0
>
> Maybe add more patches to your serie? ;)
>
> ===
>
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + rockchip,sfc-no-dma:
>
> > + vendor,bool-property:
>
> remove
> See example vendor,bool-property at:
> Documentation/devicetree/bindings/example-schema.yaml
>
> > + descrption: Boolean value for disabling DMA
>
> description:
>
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/px30-cru.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
>
> #include <dt-bindings/power/px30-power.h>
>
> > +
> > + sfc: spi at ff3a0000 {
> > + compatible = "rockchip,px30-sfc","rockchip,rk3036-sfc";
> > + reg = <0x0 0xff3a0000 0x0 0x4000>;
> > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
> > + clock-names = "sfc", "ahb";
> > + pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
> > + pinctrl-names = "default";
>
> > + power-domains = <&power PX30_PD_MMC_NAND>;
>
> Add include for PX30_PD_MMC_NAND.
>
> Check your example with scripts before you submit!
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
>
> > + flash at 0 {
>
> This controller handles only serial flash for now.
> So limit that with patternProperties.
> Also users can't add more then 4 subnodes.
> That's where these documents are for, so add!
>
>
> > + compatible = "jedec,spi-nor";
>
> > + reg = <0>;
>
> spi-max-frequency = <108000000>;
>
> > + spi-rx-bus-width = <2>;
> > + spi-tx-bus-width = <2>;
>
> The sort order is:
> compatible
> reg
> interrupts
> the rest in alphabetical order
> (no status in YAML examples)
>
>
> > + };
> > + };
> > +
> > +...
> >
More information about the linux-mtd
mailing list