[PATCH v2 23/35] mtd: spi-nor: Get rid of nor->page_size

Tudor Ambarus tudor.ambarus at microchip.com
Mon Jul 26 21:52:10 PDT 2021


nor->page_size duplicated what nor->params->page_size indicates
for no good reason. page_size is a flash parameter of fixed value
and it is better suited to be found in nor->params->page_size.

Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
 drivers/mtd/spi-nor/core.c   | 20 +++++++++-----------
 drivers/mtd/spi-nor/xilinx.c | 17 ++++++++++-------
 include/linux/mtd/spi-nor.h  |  2 --
 3 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 72dfe6274041..83f27405a000 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1953,6 +1953,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct spi_nor *nor = mtd_to_spi_nor(mtd);
 	size_t page_offset, page_remain, i;
 	ssize_t ret;
+	u32 page_size = nor->params->page_size;
 
 	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
 
@@ -1969,16 +1970,15 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 		 * calculated with an AND operation. On the other cases we
 		 * need to do a modulus operation (more expensive).
 		 */
-		if (is_power_of_2(nor->page_size)) {
-			page_offset = addr & (nor->page_size - 1);
+		if (is_power_of_2(page_size)) {
+			page_offset = addr & (page_size - 1);
 		} else {
 			uint64_t aux = addr;
 
-			page_offset = do_div(aux, nor->page_size);
+			page_offset = do_div(aux, page_size);
 		}
 		/* the size of data remaining on the first page */
-		page_remain = min_t(size_t,
-				    nor->page_size - page_offset, len - i);
+		page_remain = min_t(size_t, page_size - page_offset, len - i);
 
 		addr = spi_nor_convert_addr(nor, addr);
 
@@ -3141,7 +3141,7 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
 	if (nor->info->flags & SPI_NOR_NO_ERASE)
 		mtd->flags |= MTD_NO_ERASE;
 	mtd->writesize = nor->params->writesize;
-	mtd->writebufsize = nor->page_size;
+	mtd->writebufsize = nor->params->page_size;
 	mtd->size = nor->params->size;
 	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
@@ -3174,7 +3174,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * We need the bounce buffer early to read/write registers when going
 	 * through the spi-mem layer (buffers have to be DMA-able).
 	 * For spi-mem drivers, we'll reallocate a new buffer if
-	 * nor->page_size turns out to be greater than PAGE_SIZE (which
+	 * nor->params->page_size turns out to be greater than PAGE_SIZE (which
 	 * shouldn't happen before long since NOR pages are usually less
 	 * than 1KB) after spi_nor_scan() returns.
 	 */
@@ -3199,8 +3199,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	nor->page_size = nor->params->page_size;
-
 	/*
 	 * Configure the SPI memory:
 	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
@@ -3359,8 +3357,8 @@ static int spi_nor_probe(struct spi_mem *spimem)
 	 * and add this logic so that if anyone ever adds support for such
 	 * a NOR we don't end up with buffer overflows.
 	 */
-	if (nor->page_size > PAGE_SIZE) {
-		nor->bouncebuf_size = nor->page_size;
+	if (nor->params->page_size > PAGE_SIZE) {
+		nor->bouncebuf_size = nor->params->page_size;
 		devm_kfree(nor->dev, nor->bouncebuf);
 		nor->bouncebuf = devm_kmalloc(nor->dev,
 					      nor->bouncebuf_size,
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index a573c3cde414..a5feb86b0a7e 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -28,11 +28,12 @@ static const struct flash_info xilinx_parts[] = {
  */
 static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
 {
+	u32 page_size = nor->params->page_size;
 	u32 offset, page;
 
-	offset = addr % nor->page_size;
-	page = addr / nor->page_size;
-	page <<= (nor->page_size > 512) ? 10 : 9;
+	offset = addr % page_size;
+	page = addr / page_size;
+	page <<= (page_size > 512) ? 10 : 9;
 
 	return page | offset;
 }
@@ -40,6 +41,7 @@ static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
 static int xilinx_nor_setup(struct spi_nor *nor,
 			    const struct spi_nor_hwcaps *hwcaps)
 {
+	u32 page_size;
 	int ret;
 
 	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
@@ -64,10 +66,11 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 	 */
 	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
 		/* Flash in Power of 2 mode */
-		nor->page_size = (nor->page_size == 264) ? 256 : 512;
-		nor->mtd.writebufsize = nor->page_size;
-		nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
-		nor->mtd.erasesize = 8 * nor->page_size;
+		page_size = (nor->params->page_size == 264) ? 256 : 512;
+		nor->params->page_size = page_size;
+		nor->mtd.writebufsize = page_size;
+		nor->mtd.size = 8 * page_size * nor->info->n_sectors;
+		nor->mtd.erasesize = 8 * page_size;
 	} else {
 		/* Flash in Default addressing mode */
 		nor->params->convert_addr = s3an_convert_addr;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index bd92acdd1899..be7ebaf092fe 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -372,7 +372,6 @@ struct spi_nor_flash_parameter;
  * @name:		used to point to correct name in case of ID collisions.
  * @info:		SPI NOR part JEDEC MFR ID and other info
  * @manufacturer:	SPI NOR manufacturer
- * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
  * @read_opcode:	the read opcode
@@ -403,7 +402,6 @@ struct spi_nor {
 	const char *name;
 	const struct flash_info	*info;
 	const struct spi_nor_manufacturer *manufacturer;
-	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;
 	u8			read_opcode;
-- 
2.25.1




More information about the linux-mtd mailing list