[PATCH] mtd: spinand: Add support for XTX XT26G0xA
Felix Matouschek
felix at matouschek.org
Fri Jul 2 12:52:35 PDT 2021
Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and
XTX26G04AXXXXX SPI NAND.
These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC
(8bit strength per 512bytes).
Tested on Teltonika RUTX10 flashed with OpenWrt.
Datasheets available at
http://www.xtxtech.com/download/?AId=225
https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf
Signed-off-by: Felix Matouschek <felix at matouschek.org>
---
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/xtx.c | 122 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 1 +
4 files changed, 125 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/spi/xtx.c
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 9662b9c1d5a9..80dabe6ff0f3 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index a49cd81ae416..f5377b2ecd6d 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -881,6 +881,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
¶gon_spinand_manufacturer,
&toshiba_spinand_manufacturer,
&winbond_spinand_manufacturer,
+ &xtx_spinand_manufacturer,
};
static int spinand_manufacturer_match(struct spinand_device *spinand,
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
new file mode 100644
index 000000000000..2c2a0b9c7587
--- /dev/null
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author:
+ * Felix Matouschek <felix at matouschek.org>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_XTX 0x0B
+
+#define XT26G0XA_STATUS_ECC_MASK GENMASK(5, 2)
+#define XT26G0XA_STATUS_ECC_NO_DETECTED (0 << 2)
+#define XT26G0XA_STATUS_ECC_8_CORRECTED (3 << 4)
+#define XT26G0XA_STATUS_ECC_UNCOR_ERROR (2 << 4)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = 8;
+ region->length = 40;
+
+ return 0;
+}
+
+static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section)
+ return -ERANGE;
+
+ region->offset = 1;
+ region->length = 7;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
+ .ecc = xt26g0xa_ooblayout_ecc,
+ .free = xt26g0xa_ooblayout_free,
+};
+
+static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (status & XT26G0XA_STATUS_ECC_MASK) {
+ case XT26G0XA_STATUS_ECC_NO_DETECTED:
+ return 0;
+ case XT26G0XA_STATUS_ECC_8_CORRECTED:
+ return 8;
+ case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+ default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
+ return (status & XT26G0XA_STATUS_ECC_MASK) >> 2;
+ }
+
+ return -EINVAL;
+}
+
+static const struct spinand_info xtx_spinand_table[] = {
+ SPINAND_INFO("XT26G01A",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE1),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+ xt26g0xa_ecc_get_status)),
+ SPINAND_INFO("XT26G02A",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE2),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+ xt26g0xa_ecc_get_status)),
+ SPINAND_INFO("XT26G04A",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE3),
+ NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+ xt26g0xa_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer xtx_spinand_manufacturer = {
+ .id = SPINAND_MFR_XTX,
+ .name = "XTX",
+ .chips = xtx_spinand_table,
+ .nchips = ARRAY_SIZE(xtx_spinand_table),
+ .ops = &xtx_spinand_manuf_ops,
+};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 6bb92f26833e..5038a930128f 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -244,6 +244,7 @@ extern const struct spinand_manufacturer micron_spinand_manufacturer;
extern const struct spinand_manufacturer paragon_spinand_manufacturer;
extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
/**
* struct spinand_op_variants - SPI NAND operation variants
--
2.32.0
More information about the linux-mtd
mailing list